| |
| Issue |
Title |
| |
| No 6 (2011) |
CREATION OF GRADIENT PLASMA-SPRAYED COATINGS ON BASIS OF ZIRCONIUM DIOXIDE STABILIZED WITH YTTERBIUM DIOXIDE |
Abstract
PDF (Rus)
|
|
V. A. Okovity, F. i Panteleenko, O. G. Devoino, V. V. Okovity, S. V. Sobolevsky, A. I. Shevtsov |
| |
| No 6 (2011) |
PLASTIC DEFORMATION OF GRAPHITE WHILE HEATING COMPOSITE POWDERS |
Abstract
PDF (Rus)
|
|
V. N. Kovalevsky, A. E. Zhuk, I. V. Fomikhina, A. V. Kovalevskaya, S. V. Grigoriev, A. V. Rulkevich |
| |
| No 6 (2011) |
PAD WELDING EFFECT ON CRANKSHAFT LENGTH WHILE MAKING BUILD-UP PROCESS |
Abstract
PDF (Rus)
|
|
T. V. Vigerina |
| |
| No 5 (2011) |
INFLUENCE OF CONSTRUCTIVE AND TECHNOLOGICAL DEFECTS ON DURABILITY OF REINFORCEMENT BARS |
Abstract
PDF (Rus)
|
|
Y. V. Vasilevich, L. E. Reut, А. M. Yaznevich |
| |
| No 5 (2011) |
PROBABILISTIC STATISTICAL ASSESSMENT OF SURFACE ROUGHNESS OF PARTS BEING POLISHED WHILE USING ELECTRIC PULSE METHOD |
Abstract
PDF (Rus)
|
|
Y. V. Sinkevich, A. A. Grinevich, I. N. Yankovsky |
| |
| No 5 (2011) |
MATHEMATICAL SIMULATION OF WELDING DISTORTIONS IN THIN PLATES |
Abstract
PDF (Rus)
|
|
Afshin Kheidari Monfared, A. F. Panteleenko |
| |
| No 5 (2011) |
SURFACE MICRO-RELIEF FORMATION OF GAS-THERMAL COATING AT MAGNETIC-ELECTRIC GRINDING |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, I. O. Sokorov, M. V. Neroda, N. M. Tsionenko |
| |
| No 5 (2011) |
PARTING COATINGS FOR ALUMINUM-ALLOY PRESSURE-DIE CASTING MOULDS |
Abstract
PDF (Rus)
|
|
A. M. Michalzov, A. A. Pivavarchyk |
| |
| No 4 (2011) |
IMPROVEMENT OF SURFACE CHARGING QUALITY WITH KNURLING TOOL BY IMPARTING ULTRASONIC OSCILLATIONS TO IT |
Abstract
PDF (Rus)
|
|
M. G. Kiselev, A. V. Drozdov, V. L. Drozdov, M. S. Gurinovich |
| |
| No 4 (2011) |
PROSPECTS OF NANO-PATTERNED MATERIALS AND METHOD FOR FORMATION OF NANO-CLUSTER COMPOSITE |
Abstract
PDF (Rus)
|
|
G. S. Zhetesova, B. K. Iskakov |
| |
| No 4 (2011) |
PECULIARITIES OF BORIDE COATING FORMATION MADE OF COMPOSITE METAL-THERMAL POWDER MEDIA |
Abstract
PDF (Rus)
|
|
N. A. Galynskaya, N. G. Kukhareva, V. S. Niss, S. N. Petrovich |
| |
| No 4 (2011) |
THEORETICAL CALCULATION METHOD FOR POWDER CAPILLARY STRUCTURE OF LOOP HEAT PIPE WITH INVERTED MENISCUS |
Abstract
PDF (Rus)
|
|
A. V. Ageenko, V. V. Maziuk |
| |
| No 3 (2011) |
MAGNETO-ABRASIVE MACHINING OF SURFACES FORMED BY ELECTROMAGNET SURFACING WITH PLASTIC DEFORMATION |
Abstract
PDF (Rus)
|
|
Zh. A. Mrochek, S. L. Kozhiiro |
| |
| No 3 (2011) |
OPTIMIZATION OF CUTTING PARAMETERS ON THE BASIS OF SEMANTIC NETWORK USAGE |
Abstract
PDF (Rus)
|
|
V. M. Pashkevich, M. N. Mironova |
| |
| No 2 (2011) |
DESIGNING OF DEVICES ON THE BASIS OF EXPERT SYSTEM TECHNOLOGIES |
Abstract
PDF (Rus)
|
|
V. M. Pashkevich, M. N. Mironova |
| |
| No 2 (2011) |
RESEARCH OF PROCESSES ON FORMATION AND TRIBOTECHNICAL PROPERTIES OF WEAR-RESISTANT COMPOSITE GAS THERMAL COATINGS BEING DISPERSIVELY STRENGTHENED BY SYNTHETIC DIAMONDS AND ELECTRO-CORUNDUM |
Abstract
PDF (Rus)
|
|
O. S. Kobjakov, N. V. Spiridonov |
| |
| No 2 (2011) |
BORIDE COATINGS ON PRELIMINARY CEMENTED STEEL-20 |
Abstract
PDF (Rus)
|
|
N. G. Kukhareva, V. F. Protasevich, S. N. Petrovich |
| |
| No 1 (2011) |
PROCESS INVESTIGATIONS OF SELECTIVE LASER SINTERING OF TITANIUM POWDER POROUS MATERIALS WITH SPHERICAL PARTICLES |
Abstract
PDF (Rus)
|
|
R. E. Bykau, K. E. Beljavin |
| |
| No 1 (2011) |
GRINDING OF SURFACES WITH COATINGS FORMED BY ELECTROMAGNETIC FACING WITH SURFACE PLASTIC DEFORMATION |
Abstract
PDF (Rus)
|
|
Zh. A. Mrochek, K. S. Burdykin |
| |
| No 1 (2011) |
CERAMIC MATERIAL OF «TITANIUM OXIDE – ALUMINIUM OXIDE – SOLID LUBRICANT» SYSTEM |
Abstract
PDF (Rus)
|
|
V. A. Okovity, O. G. Devoino, А. F. Panteleenko, V. V. Okovity |
| |
| No 6 (2010) |
MECHANISMS OF MULTI-FUNCTIONAL LAYER COATINGS BASED ON SILICON CARBIDE |
Abstract
PDF (Rus)
|
|
V. N. Kovalevsky, A. E. Zhuk |
| |
| No 6 (2010) |
INFLUENCE OF MAGNETIC AND ELECTRIC GRINDING PARAMETERS ON HARDNESS, WEAR-RESISTANCE AND CHEMICAL COMPOSITION OF PROTECTIVE GAS AND THERMAL COATINGS |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, M. V. Neroda, I. O. Sokorov |
| |
| No 6 (2010) |
OBTAINING OF POWDERS FROM AUSTENITIC STEEL BY DIFFUSION ALLOYING |
Abstract
PDF (Rus)
|
|
F. I. Panteleenko, V. A. Okovity, А. F. Panteleenko |
| |
| No 6 (2010) |
OPTIMIZATION OF TECHNOLOGY PERTAINING TO PROCESSING OF MECHANICALLY ALLOYED AND DISPERSIVELY HARDENED NICKEL-CHROMIUM COMPOSITIONS IN SEMI-FINISHED PRODUCTS |
Abstract
PDF (Rus)
|
|
F. G. Lovshenko, G. F. Lovshenko |
| |
| No 6 (2010) |
PECULIAR FEATURES PERTAINING TO STRIP FORMATION FROM BAR |
Abstract
PDF (Rus)
|
|
G. N. Zdor, L. A. Isaevich, S. V. Ivanitsky |
| |
| No 5 (2010) |
ESTIMATION AND SELECTION OF CRITERIA FOR OPTIMUM CUTTING SYSTEM ACCORDING TO ENERGY-CONSUMING INDICES OF TECHNOLOGICAL EQUIPMENT |
Abstract
PDF (Rus)
|
|
J. A. Mrochek, D. V. Adamenko, V. M. Adamenko |
| |
| No 5 (2010) |
INFLUENCE OF IONIC PROCESSING ON CHANGES IN INITIAL SURFACE ROUGHNESS OF SAMPLES MADE OF D16T ALLOY |
Abstract
PDF (Rus)
|
|
S. A. Ivaschenko, S. G. Koida |
| |
| No 5 (2010) |
ANALYSIS OF MODERN ELEVATOR DESIGNS AND TENDENCIES OF THEIR DEVELOPMENT |
Abstract
PDF (Rus)
|
|
A. I. Antonevich |
| |
| No 5 (2010) |
CARBON DISTRIBUTION AND MECHANISM OF HEAT GENERATION DURING COLD DEFORMATION OF LOW CARBON STEEL SAMPLES |
Abstract
PDF (Rus)
|
|
E. A. Moisseitchik |
| |
| No 4 (2010) |
STRENGTHENING TREATMENT OF DEEP-DRAWING DIES |
Abstract
PDF (Rus)
|
|
N. A. Galynskaya, N. G. Koukhareva, S. N. Petrovich, G. V. Stassevich |
| |
| No 4 (2010) |
STRUCTURE AND MECHANICAL PROPERTIES’ RESEARCH OF A500C-CLASS REINFORCEMENT BARS |
Abstract
PDF (Rus)
|
|
A. M. Yaznevich |
| |
| No 3 (2010) |
HIGHER EFFICIENCY OF MAGNETIC AND ABRASIVE MACHINING OF MACHINE PARTS’ DISCONTINUOUS SURFACES |
Abstract
PDF (Rus)
|
|
L. M. Akoulovich, L. E. Sergeev, E. A. Korzoune, V. E. Babich |
| |
| No 3 (2010) |
METHODOLOGY FOR OPTIMIZATION OF THERMAL TECHNOLOGICAL PROCESSES |
Abstract
PDF (Rus)
|
|
N. P. Voronova, S. M. Gribkova |
| |
| No 3 (2010) |
INFLUENCE OF ANNEALING TEMPERATURE ON SOME PHYSICAL PROPERTIES OF CUBIC BORON NITRIDES OBTAINED FROM PYROLITIC BORON NITRIDE |
Abstract
PDF (Rus)
|
|
N. D. Bayluk, S. V. Demidkov, V. A. Zankevich, O. M. Kosarev, L. I. Rakitskaya, V. D. Sizov |
| |
| No 3 (2010) |
THEORETICAL FLANGING PRINCIPLES IN ROUND BILLET WITH ITS LOCAL HEATING |
Abstract
PDF (Rus)
|
|
L. A. Isaevich, M. I. Sidorenko, А. V. Shimansky, A. N. Sidorenko |
| |
| No 2 (2010) |
TRANSFORMATIONS IN NANO-DIAMONDS WITH FORMATION OF NANO-POROUS SILICON CARBIDE AT HIGH PRESSURE |
Abstract
PDF (Rus)
|
|
V. N. Kovalevsky, S. V. Grigoriev, А. E. Zhuk, A. V. Kovalevskay, I. F. Fomikhina |
| |
| No 2 (2010) |
EXPERIMENTALLY-STATISTICAL MODEL OF CLADDING LAYER FORMATION PROCESS ON SLIDE-WAYS |
Abstract
PDF (Rus)
|
|
N. N. Maksimchenko |
| |
| No 1 (2010) |
APPLICATION OF EXCEL INFORMATION TECHNOLOGIES FOR SOLVING PROBLEMS ON OPTIMIZATION OF WIRE BRUSHING PARAMETERS |
Abstract
PDF (Rus)
|
|
S. I. Romanchuk, I. L. Barshaj, S. P. Goncharov |
| |
| No 1 (2010) |
INVESTIGATIONS OF POWDER METALLOTHERMIC MIXTURES FOR BORATING PROCESS |
Abstract
PDF (Rus)
|
|
B. B. Khina, V. F. Protasievich, N. G. Kouhareva, S. N. Petrovic |
| |
| No 6 (2009) |
COMPLEX APPROACH TO DEVELOPMENT OF TECHNOLOGICAL EQUIPMENT FOR ELECTRO-IMPULSE POLISHING |
Abstract
PDF (Rus)
|
|
I. V. Sinkevich |
| |
| No 6 (2009) |
OPTIMIZATION AND COMPUTER DESIGN OF THERMO-CYCLING HEAT TREATMENT PROCESS FOR P18 HIGH-SPEED STEEL |
Abstract
PDF (Rus)
|
|
A. A. Shmatov, I. V. Fomihina, O. V. Zhilinsky, T. V. Laktjushina, S. I. Marochkina |
| |
| No 6 (2009) |
HEATING OF BLANK IN FORM OF PRISM IN ACCORDANCE WITH TECHNOLOGICAL LIMITATIONS |
Abstract
PDF (Rus)
|
|
V. B. Kovalevsky, M. Radzhukh |
| |
| No 6 (2009) |
DETERMINATION OF OPTIMUM COATING SURFACING PARAMETERS BY ELECTRO-CONTACT FLASHING METHOD |
Abstract
PDF (Rus)
|
|
K. E. Beljavin, A. V. Sosnovsky |
| |
| No 5 (2009) |
TECHNOLOGICAL PROVISION OF ACCURACY AND QUALITY PARAMETERS OF INTRICATE PROFILE PARTS AT HIGH-SPEED MULTI-COORDINATE MACHINING |
Abstract
PDF (Rus)
|
|
V. K. Sheleg, A. F. Prisevok, P. N. Klausuts |
| |
| No 5 (2009) |
MODELING OF QUALITY FORMATION OF PIG IRON BILLET SURFACE AT WIRE BRUSH MILLING |
Abstract
PDF (Rus)
|
|
I. L. Barshaj, E. E. Feldshtein, А. V. Birich, S. P. Goncharov |
| |
| No 5 (2009) |
INVESTIGATION OF MODIFICATION PROCESSES IN RESPECT OF WEAR-RESISTANT PLASMA COATINGS USING PULSE-PLASMA MACHINING |
Abstract
PDF (Rus)
|
|
V. A. Okovity, F. I. Panteleenko, А. F. Panteleenko, V. V. Okovity, A. I. Shevtsov, A. F. Iliouschenko, V. M. Astashinsky |
| |
| No 5 (2009) |
SYSTEM OF MATHEMATICAL MODELING OF MACHINING ATTACHMENTS FOR CLEANING SMALL DIAMETER OPENINGS IN ELEMENT PARTS OF HYDRAULIC DRIVE |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, A. G. Jasev |
| |
| No 5 (2009) |
INVESTIGATION OF TRIBO-TECHNICAL COATING PROPERTIES OBTAINED BY ELECTRO-CONTACT FLASHING |
Abstract
PDF (Rus)
|
|
K. E. Beljavin, A. V. Sosnovsky |
| |
| No 4 (2009) |
INFLUENCE OF TECHNOLOGICAL MODES OF MAGNETIC-ELECTRIC GRINDING ON MICROSTRUCTURE OF GAS-THERMAL SPRAYED NI–CR–B–SI-COATINGS |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, M. V. Niaroda, I. O. Sokorov, A. A. Barkun |
| |
| No 4 (2009) |
INFLUENCE OF POWER SPENT ON OVERCOMING CUTTING RESISTANCE FORCES ON ELECTRIC MOTOR POWER IN SYSTEM OF AUTOMATIC MACHINE CONTROL WITH NUMERICAL PROGRAMMED CONTROL |
Abstract
PDF (Rus)
|
|
Shuxin Xu, I. P. Filonov |
| |
| No 4 (2009) |
INFLUENCE OF THERMAL DIFFUSION CARBONITRATION AND STRUCTURE OF DIFFUSION COATINGS ON MECHANICAL PROPERTIES OF P6M5 TOOL STEEL |
Abstract
PDF (Rus)
|
|
N. G. Kouhareva, S. N. Petrovich, N. A. Galynskaya |
| |
| No 3 (2009) |
INSTALLATION FOR LARGE SIZE STAMP HARDENING TRANINIG BY WATER-AIR MIXTURE |
Abstract
PDF (Rus)
|
|
L. A. Glazkov, M. S. Zheludkevitcsh, D. L. Zhilyanin, A. A. Tabulin, V. V. Tarbaev |
| |
| No 2 (2009) |
HIGHER EFFICIENCY IN USAGE OF MONO-CRYSTAL SILICON WHILE CUTTING INGOTS IN PLATES |
Abstract
PDF (Rus)
|
|
V. K. Sheleg, A. E. Korzun, S. E. Kraiko |
| |
| No 2 (2009) |
INVESTIGATION OF STRUCTURE-FORMATION MECHANISMS IN DIFFUSION BORATING OF WASTES WHILE PRODUCING STEEL AND IRON SHOT |
Abstract
PDF (Rus)
|
|
E. F. Panteleenko |
| |
| No 2 (2009) |
RESOURCE SAVING TECHNOLOGICAL PROCESS OF LARGE-SIZE DIE THERMAL TREATMENT |
Abstract
PDF (Rus)
|
|
L. A. Glazkov, M. S. Zheludkevitcsh, D. L. Zhilyanin, A. A. Tabulin, V. V. Tarbaev |
| |
| No 1 (2009) |
ADVANCED METHODS FOR SURFACE SHAPE FORMATION OF HYDRAULIC CYLINDER RODS |
Abstract
PDF (Rus)
|
|
Zh. A. Mrochek, G. F. Shaturov, A. A. Zholobov, D. G. Shaturov |
| |
| No 1 (2009) |
ELECTRIC CONTACT SINTERING OF POWDER COATINGS AND PROVISION OF THEIR PROPERTY STABILITY |
Abstract
PDF (Rus)
|
|
V. K. Yaroshevich |
| |
| No 1 (2009) |
HIGHER VISCOSITY OF LOGWAY FRACTURE FOR WIRE DRAWING |
Abstract
PDF (Rus)
|
|
V. N. Kovalevsky, D. G. Sachava |
| |
| No 1 (2009) |
LOW-TEMPERATURE SURFACE HARDENING FOR DIAMOND TOOLS |
Abstract
PDF (Rus)
|
|
A. A. Shmatov, O. O. Smilovenko |
| |
| No 1 (2009) |
KINEMATICS MODELING OF MAGNETIC AND ABRASIVE SILICON WAFER POLISHING |
Abstract
PDF (Rus)
|
|
R. V. Fedortsev, N. S. Khomich, A. I. Lougovik, A. E. Korzun, P. V. Kukhto |
| |
| No 1 (2009) |
IDENTIFICATION OF СOMPLICATED MECHANICAL SYSTEM PARAMETERS AT THERMAL FORCE ACTION |
Abstract
PDF (Rus)
|
|
A. V. Chigarev, D. N. Mironov |
| |
| No 6 (2008) |
ROLE OF STRUCTURE BEING IN STRESSED AND DEFORMED STATE IN FORMATION OF DEFORMATION MOTION TURBULENCE |
Abstract
PDF (Rus)
|
|
E. M. Makushok, E. E. Petiuoshik, O. P. Reut |
| |
| No 6 (2008) |
RESEARCH OF LASER THERMOHARDENING PROCESSES ОF INTERNAL CONTACT SURFACES IN TRACTOR «BELARUS» BRAKE MECHANISMS |
Abstract
PDF (Rus)
|
|
O. S. Kobiakov, N. V. Spiridonov, M. A. Kardapalova, A. A. Barkun |
| |
| No 6 (2008) |
TECHNOLOGY OF QUICK HOT EXTRUSION OF ROD PRODUCTS WITH END FACE CLADDING |
Abstract
PDF (Rus)
|
|
I. V. Kachanov, V. N. Shariy |
| |
| No 6 (2008) |
WEAR RESISTANCE INVESTIGATION OF STRENGTHENING SURFACES ON PRODUCTS MADE OF D16T ALLOY |
Abstract
PDF (Rus)
|
|
S. A. Ivaschenko, S. G. Koida |
| |
| No 5 (2008) |
FORECASTING OF PARAMETRIC RELIABILITY OF HYDRAULIC STEERING BOOSTER OF MOBILE MACHINE |
Abstract
PDF (Rus)
|
|
G. A. Mrochek, V. P. Tarasik, T. V. Mrochek |
| |
| No 5 (2008) |
IMPROVEMENT OF WEAR-RESISTANCE AND SERVICE LIFE OF MULTI-DISK BRAKE MECHANISMS OF «BELARUS» TRACTOR BY LASER THERMAL HARDENING OF FAST WEARING PARTS |
Abstract
PDF (Rus)
|
|
O. S. Kobjakov, N. V. Spiridonov, A. A. Barkun |
| |
| No 5 (2008) |
OBTAINING LAYER NANO-COATINGS ON DIAMOND POWDERS IN PLANAR MAGNETRON |
Abstract
PDF (Rus)
|
|
V. N. Kovalevsky, I. V. Fomikhina, A. V. Kovalevskaya, S. V. Grigoriev, A. E. Zhuk |
| |
| No 4 (2008) |
MUTUAL SOLUBILITY ОF CARBIDES WITHIN MULTICOMPONENT DIFFUSIVE COATINGS ОN HARD ALLOYS |
Abstract
PDF (Rus)
|
|
A. A. Shmatov, S. V. Poberezhny |
| |
| No 4 (2008) |
PECULIARITIES OF LAMB WAVE PROPAGATION THROUGH TWO-LAYERED THIN PLATE MATERIALS |
Abstract
PDF (Rus)
|
|
A. R. Baev, P. P. Prokhorenko |
| |
| No 4 (2008) |
FORMATION OF CONTINUOUS CASTING OUTSIDE MOULD |
Abstract
PDF (Rus)
|
|
E. B. Demchenko, E. I. Marukovich |
| |
| No 4 (2008) |
OBTAINING STRIPS WITH VARIABLE THICKNESS AND CONTROLLED WIDENING |
Abstract
PDF (Rus)
|
|
L. A. Isayevich, M. I. Sidorenko, D. M. Ivanitski, M. M. Malekian |
| |
| No 3 (2008) |
DETERMINATION OF PARAMETERS OF LENGTHWISE ROLLING PROCESS FOR OBTAINING STRIPS OF VARIABLE THICKNESS WITH INCREASING REDUCTION |
Abstract
PDF (Rus)
|
|
L. A. Isaevich, M. I. Sidorenko, D. M. Ivanitski, M. M. Malekian |
| |
| No 3 (2008) |
THERMAL AND PHYSICAL FEATURES OF MAGNETIC AND ELECTRIC GRINDING PROCESS OF GAS AND THERMAL PROTECTIVE COATINGS |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, I. O. Sokorov, M. V. Niaroda |
| |
| No 3 (2008) |
ROTOR STABILITY OF AXIAL AND PISTON HYDRAULIC MACHINE |
Abstract
PDF (Rus)
|
|
M. A. Makovsky, V. S. Shevchenko, A. V. Korolkevich |
| |
| No 3 (2008) |
MOTION EQUATIONS OF ROLLER-ANNULAR MECHANISMS WITH ONE VARIABLE COEFFICIENT |
Abstract
PDF (Rus)
|
|
I. O. Lapanovich |
| |
| No 2 (2008) |
DETERMINATION ОF DRESS ROLL OPTIMAL RADIUS WHILE PRODUCING PARTS WITH TROCHOIDAL PROFILE |
Abstract
PDF (Rus)
|
|
E. N. Yankevich |
| |
| No 2 (2008) |
OPTIMIZATION OF ENERGY-POWER MODE IN IMPACT EXTRUSION OF RODS PRODUCTION WITH BUTT-END CLADDING |
Abstract
PDF (Rus)
|
|
I. V. Kachanov, V. N. Shari |
| |
| No 2 (2008) |
METAL CHIP HEATING PROCESS INVESTIGATION (Part 3) |
Abstract
PDF (Rus)
|
|
O. M. Dyakonov |
| |
| No 2 (2008) |
IMPROVEMENT OF OPERATIONAL CHARACTERISTICS OF ELECTRIC COOKER BURNERS |
Abstract
PDF (Rus)
|
|
I. M. Kirick, D. A. Smagin |
| |
| No 2 (2008) |
ATTACK ON WATER BY CARBON OF SOLID FUEL |
Abstract
PDF (Rus)
|
|
N. S. Nazarov, A. I. Olevanov |
| |
| No 2 (2008) |
MATHEMATICAL MODEL OF MECHANICAL SYSTEM WITH ROLLER-RECIRCULATING MECHANISM ON BASIS OF RAUSES EQUATIONS |
Abstract
PDF (Rus)
|
|
I. O. Lapanovich |
| |
| No 1 (2008) |
TECHNOLOGICAL METHODS FOR LASER HARDENING OF INTERNAL CONTACT SURFACES OF «BELARUS» TRACTOR BRAKE MECHANISMS |
Abstract
PDF (Rus)
|
|
O. S. Kobjakov, N. V. Spiridonov, O. G. Dhevoino, A. A. Barkun, L. I. Piletskaya |
| |
| No 1 (2008) |
INVESTIGATION OF METAL CHIP HEATING PROCESS (Part 2) |
Abstract
PDF (Rus)
|
|
O. M. Dyakonov |
| |
| No 1 (2008) |
NUMERICAL ESTIMATE OF CONNECTION DURABILITY OF CONVEYER RUBBER-CABLE BELTS |
Abstract
PDF (Rus)
|
|
V. Y. Prushak, O. L. Miranovich |
| |
| No 1 (2008) |
METHODS FOR CUTTING FEED STABILIZATION OF POWER-PRODUCING BED PLATE OF MACHINE TOOLS |
Abstract
PDF (Rus)
|
|
A. A. Zhuk, V. S. Shevchenko |
| |
| No 1 (2008) |
DETERMINATION OF RATIONAL REGIMES FOR GRINDING BARREL-SHAPED SURFACES OF ROLLERS ENSURING THEIR ROUGHNESS ON RA PARAMETER WITHIN LIMITS OF 0,16–0,32 MICROMETERS |
Abstract
PDF (Rus)
|
|
G. P. Krivko, D. A. Cherey |
| |
| No 6 (2007) |
INFLUENCE OF MODES AND METHODS FOR POWDER ADDITIVE INTRODUCTION ON QUALITY OF BUILT-UP LAYER IN CARBON DIOXIDE MEDIUM |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, V. V. Kurash, A. V. Kudina, V. V. Khrolenok, A. S. Nikitina |
| |
| No 6 (2007) |
EFFICIENCY IMPROVEMENT OF UNDERGROUND WATER DEIRONING PROCESS ON THE BASIS OF DEVELOPMENT OF NEW GASEOUS-LIQUID EJECTOR |
Abstract
PDF (Rus)
|
|
V. V. Grudanov, A. A. Brench, Yu. A. Sekatskaja |
| |
| No 6 (2007) |
INFLUENCE OF CLEARANCE BETWEEN RIB POINTS ON HEAT TRANSFER OF HEAT EXCHANGERS BEING ASSEMBLED WITH THE HELP OF FLAT PIPES WITH CUT RIBBING |
Abstract
PDF (Rus)
|
|
A. I. Dzyakau, V. G. Kiselev, V. N. Sukonkin |
| |
| No 6 (2007) |
OPTIMIZATION OF STEEL SATURATION PROCESSES USING CARBIDE-FORMING ELEMENTS IN SYSTEMS BASED ON Cr-Ti-V AND Cr-Ti-Mn |
Abstract
PDF (Rus)
|
|
A. A. Shmatov |
| |
| No 6 (2007) |
METAL CHIP HEATING PROCESS INVESTIGATION (Part I) |
Abstract
PDF (Rus)
|
|
O. M. Dyakonov |
| |
| No 5 (2007) |
ANALYSIS AND COMPARISON OF VARIOUS DEVICES AND METHODS FOR ROLLING STRIPS WITH VARIABLE THICKNESS ALONG THEIR LENGTH |
Abstract
PDF (Rus)
|
|
L. A. Isaevich, M. M. Malekian |
| |
| No 5 (2007) |
MECHANICAL PROPERTIES OF TOOL STEELS WITH DIFFUSION CARBIDE AND NITRO-CARBON LAYERS |
Abstract
PDF (Rus)
|
|
N. G. Kukhareva, S. N. Petrovich, N. A. Galynskaya |
| |
| No 4 (2007) |
TOPOGRAPHY FORMATION OF 12ХН3А STEEL PART SURFACE AT NEEDLE MILLING |
Abstract
PDF (Rus)
|
|
I. L. Barshaj, E. E. Feldshtein, S. P. Goncharov |
| |
| No 4 (2007) |
CALCULATION OF REACTION COMPLETENESS AND SUBSTANCE TRANSFORMATION AT WATER-COAL GASIFICATION |
Abstract
PDF (Rus)
|
|
N. S. Nazarov, I. N. Nazarov |
| |
| No 4 (2007) |
HYDRODYNAMIC RESISTANCE OF UNIFIED MODULE RECUPERATOR OF HEATING AND THERMAL FURNACES AT BLANKING AND MACHINE-ASSEMBLING SHOPS OF ENGINEERING AND AUTOMOBILE-TRACTOR PLANTS |
Abstract
PDF (Rus)
|
|
A. P. Nesenchouk, N. L. Mandel, V. N. Shishkov, G. S. Novgorodova, T. V. Ryzhova, M. G. Pshonik, A. R. Kachar |
| |
| No 4 (2007) |
ANALYSIS OF DESIGN PECULIARITIES PERTAINING TO DRUMS OF CONTINUOUS MACHINES |
Abstract
PDF (Rus)
|
|
V. Yu. Prushak, O. L. Miranovich |
| |
| No 4 (2007) |
GENERAL RULES OF SIC FORMATION IN DIAMOND-CONTAINING COMPOSITION AT LOW PRESSURE |
Abstract
PDF (Rus)
|
|
A. E. Zhuk |
| |
| No 4 (2007) |
PECULIARITIES OF MAGNETIC-ELECTRIC GRINDING OF GAS-TERMAL SPRAYED COATINGS |
Abstract
PDF (Rus)
|
|
N. V. Spiridonov, M. V. Niaroda |
| |
| 1 - 100 of 221 Items |
1 2 3 > >>
|
