Effect of Technological Clearances on Kinematic Precision of Cycloid Speed Reducers
Abstract
The purpose of the present paper is to determine backlash value and influence of pin meshing compliance on the kineinatical precision of the cycloid speed reducer. The paper gives an algorithm of determination of the transmission backlash. The equation for analytical calculation of the algorithm has been derived. The C++ computer program for Windows with the purpose to realize the obtained algorithm has been developed. On the basis of the program the dependence of the normal original gap distribution in the pm gearing and dependence of backlash value on the eccentric rotation angle have been drawn. Methodology for determination of the influence of elastic backlash on the kinematical precision and experimental curve of the angle transference error of input and output shafts have been presented.
About the Authors
O. V. Berestnev
Institute of Mechanics and Reliability of Machines of the NAS of Belarus
Belarus
D. O. Teterioukov
Institute of Mechanics and Reliability of Machines of the NAS of Belarus
Belarus
References
1. Teteryukov D. O. Kinematika planetarnogo tsevochnogo reduktora // Reduktorostroenie Rossii: Sostoyanie, problemy, perspektivy: Tez. dokl. nauch.-prakt. konf., Sankt-Peterburg, 27-31 maya 2002 g. - SPb., 2002. - S. 64-66.
2. Blanche J. G., Yang D. S. HL Cycloid drives with machining tolerances // Journal of Mechanism, Transmissions and Automation in Design. - 1989. - Vol. 111. - P. 337-344.
3. Yudin V. I., Lobastov V. K. K teorii proektirovaniya «real'nykh» planetarnykh peredach s tsevochnym vne- polyusnym zatsepleniem: Teoriya peredach v mashinostroenii. - M.: Nauka, 1971. - S. 83-95.
4. Teteryukov D. O. Opredelenie zakola raspredeleniya zazorov v tsevochnom zatseplenii // Vestnik Mogilevskogo gosudarstvennogo tekhnicheskogo universiteta. - Mogilev, 2002. - S. 121-124.
5. Berestnev O. V., Teteryukov D. O. Metodika raskrytiya staticheskoi neopredelimosti v zadache raspredeleniya peredavaemogo usiliya v tsevochnom zatseplenii tro- khoidnoi peredachi s uchetom tekhnologicheskikh zazorov // Vesti Natsional'noi akademii nauk Belarusi. Seriya fiz.-tekh. nauk. - Mn., 2002. - № 3. - S. 35-38.
6. Katalog firmy Teijin Seiki So Ltd «High precision control». - 1998. - 30 c.
For citations:
Berestnev O.V.,
Teterioukov D.O.
Effect of Technological Clearances on Kinematic Precision of Cycloid Speed Reducers. Science & Technique. 2003;(2):29-34.
(In Russ.)
Views:
332
Email this article 