ANALYSIS OF METHODOLOGIES FOR NON-DESTRUCTIVE TESTING OF CONCRETE STRUCTURES IN ACCORDANCE WITH EXISTING STATE STANDARDS AND NORMS OF EUROPEAN UNION
Abstract
Solution of the problem pertaining to increase of the operational period of buildings and structures is determined mainly by efficiency of control system for reinforced concrete structures within the whole period of their operation. The paper contains comparative analysis of approaches to evaluation of concrete strength in the structures in accordance with the existing norms of the Republic of Belarus and Russia and some European standards, particularly СТБ EN 13791, which have recently become effective. Differences in methodologies for evaluation of concrete strength characteristics and criteria of concrete compliance with strength grade have revealed in the paper.
About the Authors
D. Yu. Snezhkov
Belarusian National Technical University
Belarus
Belarus
S. N. Leonovich
Belarusian National Technical University
Belarus
Belarus
A. V. Voznishchik
Belarusian National Technical University
Belarus
Belarus
References
1. Бетоны. Методы определения прочности по контрольным образцам : ГОСТ 10180–90. – Введ. 01.01.91. – М., 1991. – 16 с.
2. Бетоны. Ультразвуковой метод определения прочности : ГОСТ 17624–87. – Введ. 01.01.88. – М., 1988. – 12 с.
3. Бетоны. Определение прочности механическими методами неразрушающего контроля : ГОСТ 22690–88. – Введ. 01.01.91. – М., 1991. – 22 с.
4. Бетонные и железобетонные конструкции : СНБ 5.03.01–02. – Минск : Минстройархитектуры, 2003. – 139 с.
5. Оценка прочности на сжатие конструкций и элементов сборного бетона в реальных условиях : СТБ EN 13791–2009. – Минск : Стройтехнорм, 2010.
6. Bewertung der Druckfestigkeit von Beton in Bauwerken oder in Bauwerksteilen : DIN EN 13791–2009.
7. Бетон. Ч. 1: Требования, показатели, изготовление и соответствие : СТБ EN 206-1–2009.
Review
For citations:
Snezhkov D.Yu., Leonovich S.N., Voznishchik A.V. ANALYSIS OF METHODOLOGIES FOR NON-DESTRUCTIVE TESTING OF CONCRETE STRUCTURES IN ACCORDANCE WITH EXISTING STATE STANDARDS AND NORMS OF EUROPEAN UNION. Science & Technique. 2013;(2):33-39. (In Russ.)
Views:
1848
Email this article 