Influence оf 2d Vibratory Motion Conveyed to Billet on Force And Timing Parameters of its Contact Interaction With Sawing Disc
Abstract
The paper presents an experimental investigation on influence of 2D vibratory dimension conveyed to a billet on force and timing parameters of its contact interaction with a sawing disc. Description of the modernized sawing section ensuring conveyance of 2D vibratory motion to a billet, methodology and hardware facilities applied for normal force measurement of its impact with the disc and longevity of their contact for the period of the billet circulation motion. The paper provides, analyzes and generalizes experimentally obtained dependences reflecting influence of gap clearance between a boom and an upper stop on the mentioned force and timing parameters of the billet contact interaction with the sawing disc.
About the Authors
M. G. Kiselev
Belarusian National Technical University
Belarus
A. V. Drozdov
Belarusian National Technical University
Belarus
D. A. Yamnaya
Belarusian National Technical University
Belarus
References
1. Epifanov, V. I. Tekhnologiya obrabotki almazov v brilliantakh: ucheb. dlya sred. PTU / V. I. Epifanov, A. Ya. Pesina, L. V. Zykov. - 4-e izd., pererab. i dop. - M. : Vyssh. shk., 1987. - 335 s.
2. Kiselev, M. G. Povyshenie intensivnosti i kachestva raspilivaniya tverdykh i sverkhtverdykh materialov putem soobshcheniya zagotovke dvukhmernogo tsirkulyatsionnogo dvizheniya / M. G. Kiselev, A. V. Drozdov, D. A. Yamnaya // Vestnik BNTU. - 2011. - № 5. - S. 36-40.
3. Kiselev, M. G. Issledovanie vremennykh i chastotnykh parametrov kontaktnogo vzaimodeistviya zagotovki s raspilovochnym diskom pri soobshchenii ei dvukhmernogo periodicheskogo dvizheniya / M. G. Kiselev, A. V. Drozdov, D. A. Yamnaya // Vestnik Polotskogo gosudarstvennogo universiteta. Sektsiya. «Promyshlennost'. Prikladnye nauki». - 2012. - № 3. - S. 102-108.
4. Kiselev, M. G. Vliyanie uslovii vozbuzhdeniya strely raspilovochnoi sektsii na parametry kolebatel'nogo dvizheniya zagotovki / M. G. Kiselev, A. V. Drozdov, D. A. Yamnaya // Materialy, tekhnologii, instrument. - 2013. - T. 18, № 1. - S. 78-85.
5. Kiselev, M. G. Metodiki opredeleniya prostranstvenno-vremennykh parametrov kontaktnogo vzaimodeistviya koleblyushcheisya zagotovki s raspilovochnym diskom / M. G. Kiselev, A. V. Drozdov, D. A. Yamnaya // Metrologiya i priborostroenie. - 2012. - № 2. - S. 26-29.
For citations:
Kiselev M.G.,
Drozdov A.V.,
Yamnaya D.A.
Influence оf 2d Vibratory Motion Conveyed to Billet on Force And Timing Parameters of its Contact Interaction With Sawing Disc. Science & Technique. 2014;(1):19-25.
(In Russ.)
Views:
1642
Email this article 