Preview

Influence оf 2d Vibratory Motion Conveyed to Billet on Force And Timing Parameters of its Contact Interaction With Sawing Disc

Abstract

The paper presents an experimental investigation on influence of 2D vibratory dimension conveyed to a billet on force and timing parameters of its contact interaction with a sawing disc. Description of the modernized sawing section ensuring conveyance of 2D vibratory motion to a billet, methodology and  hardware facilities applied for normal force measurement of its impact with the disc and longevity of their contact for the period of the billet circulation motion. The paper provides, analyzes and generalizes experimentally obtained dependences reflecting influence of gap clearance between a boom and an upper stop on the mentioned force and timing parameters of the billet contact interaction with the sawing disc.

About the Authors

M. G. Kiselev
Belarusian National Technical University
Belarus


A. V. Drozdov
Belarusian National Technical University
Belarus


D. A. Yamnaya
Belarusian National Technical University
Belarus


References

1. Епифанов, В. И. Технология обработки алмазов в бриллиантах: учеб. для сред. ПТУ / В. И. Епифанов, А. Я. Песина, Л. В. Зыков. – 4-е изд., перераб. и доп. – М. : Высш. шк., 1987. – 335 с.

2. Киселев, М. Г. Повышение интенсивности и качества распиливания твердых и сверхтвердых материалов путем сообщения заготовке двухмерного циркуляционного движения / М. Г. Киселев, А. В. Дроздов, Д. А. Ямная // Вестник БНТУ. – 2011. – № 5. – С. 36–40.

3. Киселев, М. Г. Исследование временных и частотных параметров контактного взаимодействия заготовки с распиловочным диском при сообщении ей двухмерного периодического движения / М. Г. Киселев, А. В. Дроздов, Д. А. Ямная // Вестник Полоцкого государственного университета. Секция. «Промышленность. Прикладные науки». – 2012. – № 3. – С. 102–108.

4. Киселев, М. Г. Влияние условий возбуждения стрелы распиловочной секции на параметры колебательного движения заготовки / М. Г. Киселев, А. В. Дроздов, Д. А. Ямная // Материалы, технологии, инструмент. – 2013. – Т. 18, № 1. – С. 78–85.

5. Киселев, М. Г. Методики определения пространственно-временных параметров контактного взаимодействия колеблющейся заготовки с распиловочным диском / М. Г. Киселев, А. В. Дроздов, Д. А. Ямная // Метрология и приборостроение. – 2012. – № 2. – С. 26–29.


Review

For citations:


Kiselev M.G., Drozdov A.V., Yamnaya D.A. Influence оf 2d Vibratory Motion Conveyed to Billet on Force And Timing Parameters of its Contact Interaction With Sawing Disc. Science & Technique. 2014;(1):19-25. (In Russ.)

Views: 1639


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2227-1031 (Print)
ISSN 2414-0392 (Online)