OBTAINING STRIPS WITH VARIABLE THICKNESS AND CONTROLLED WIDENING
Abstract
The paper describes flow chart of strip rolling with variable thickness in the rolls with changeable clearance between them and non-driven rollers that ensure spread widening control. The paper presents necessary formulae for calculation of backward tension in the rolls which is considered as drawing tension in the rollers. Accomplishment of the given process is theoretically substantiated in the paper.
About the Authors
L. A. Isayevich
Belarusian National Technical University
M. I. Sidorenko
Belarusian National Technical University
D. M. Ivanitski
Belarusian National Technical University
M. M. Malekian
Belarusian National Technical University
References
1. Громов, И. П. Теория обработки металлов давлением / И. П. Громов. – М. : Металлургия, 1978. – 360 с.
2. Перлин, И. Л. Теория волочения / И. Л. Перлин, М. З. Ерманок. – М. : Металлургия, 1971. – 448 с.
3. Анурьев, В. И. Справочник конструктора машиностроителя. Т.1 / В. И. Анурьев. – М.: Машиностроение, 1980. – 728 с.
Review
For citations:
Isayevich L.A., Sidorenko M.I., Ivanitski D.M., Malekian M.M. OBTAINING STRIPS WITH VARIABLE THICKNESS AND CONTROLLED WIDENING. Science & Technique. 2008;(4):35-43. (In Russ.)
Views:
2498
Email this article 