DESIGN OPTIMIZATION OF LAY-ON INSTRUMENT CAPACITOR
Abstract
The paper describes a development of a mathematical model for a lay-on instrument capacitor that takes into account an actual electrode thickness. Validity check of the mathematical model has been carried out in the paper. The paper contains quantitative evaluations and recommendations on design optimization of the lay-on instrument capacitor.
References
1. Wah On Ho, S. Electrochemical sensor for measurement of urea and creatinine in serum based on ac impedance measurement of enzyme-catalyzed, polymer transformation / S. Wah On Ho, C. J. Krause, Mc Neil // Analytical Chemistry. – 1999. – № 71. – P. 1940–1946.
2. Gusepi-Elie, A. Chemical and biological sensors based on electrically conducting polymers / A. Gusepi-Elie, G. G. Wal-lace, T. Matsue // Handbook of Conductive Polymers. – 2nd Edition. – Marcel Dekker, NY, 1998.
3. Li, X. B. Instrumentation and Inverse Problem Solving for Impedance Imaging. Ph.D. Dissertation, Department of Electrical Engineering, University of Washington Graduate School. – Washington, 2006.
4. Датчик для измерения уровня жидкости : пат. 2196966 РФ, МКИ G01F23/26. / Г. В. Медведев, В. А. Мишин, В. Н. Шивринский. – № 2001108624/28 ; заявл. 30.03.2001 ; опубл.20.01.2003.
5. Zaretsky, M. C. Continuum Properties from Interdigital Electrode Dielectrometry / M. C. Zaretsky, L. Mouayad, J. R. Melcher // IEEE Tramactions on Electrical Insulation. – 1988. – Vol. 23, № 6. – P. 897–917.
6. Mamishev, A. V. Optimization of Multi-Wavelength Interdigital Dielectrometry Instrumentation and Algorithms / A. V. Mamishev, B. C. Lesieutre, M. Zahn // IEEE Trans. Dielectr. Electr. Insul. – 1998. – Vol. 5, № 3. – P. 408–420.
7. Sheiretov, Y. Modeling of Spatially Periodic Dielectric Sensors in the Presence of a Top Ground Plane Bounding the Test Dielectric / Y. Sheiretov, M. Zahn // IEEE Trans. Dielectr. Electr. Insul. – 2005. – Vol. 12, № 5. – P. 993–1004.
Review
For citations:
Jejora A.A. DESIGN OPTIMIZATION OF LAY-ON INSTRUMENT CAPACITOR. Science & Technique. 2010;(5):43-48. (In Russ.)