INFLUENCE OF IONIC PROCESSING ON CHANGES IN INITIAL SURFACE ROUGHNESS OF SAMPLES MADE OF D16T ALLOY
Abstract
Results of the investigations pertaining to study of influence of technological ionic processing process parameters on changes in an initial roughness of samples made of D16Т alloy are provided in the paper.
The paper shows that bombardment by high-energy Ti+-ions is effective at processing a surface with a high initial roughness and is not suitable for processing surfaces after grinding and polishing. It is necessary to use low-energy ions of inert gases for processing a surface with a low initial roughness
About the Authors
S. A. Ivaschenko
Belarusian National Technical University
S. G. Koida
Belarusian National Technical University
References
1. Плешивцев, Н. В. Катодное распыление / Н. В. Плешивцев. – М. : Атомиздат, 1968. – 347 с.
2. Иващенко, С. А. Газотермические и вакуумно-плазменные покрытия со специальными физико-механическими свойствами / С. А. Иващенко, И. С. Фролов, Ж. А. Мрочек. – Минск : Технопринт, 2001. – 236 с.
3. Иващенко, С. А. Вакуумно-плазменные покрытия / Ж. А. Мрочек, А. К. Вершина, С. А. Иващенко. – Минск : Технопринт, 2004. – 369 с.
Review
For citations:
Ivaschenko S.A., Koida S.G. INFLUENCE OF IONIC PROCESSING ON CHANGES IN INITIAL SURFACE ROUGHNESS OF SAMPLES MADE OF D16T ALLOY. Science & Technique. 2010;(5):14-17. (In Russ.)
Views:
660
Email this article 