Effect of Electrolyte-Plasma Treatment on the Structure and Surface Properties of Medical-Grade Corrosion-Resistant Steels

This paper presents the results of a study on the effect of Electrolytic-Plasma Treatment (EPT) parameters on the structure and properties of the surface layer of austenitic corrosion-resistant steels AISI 304, AISI 316L, and AISI 321, which are widely used in the production of medical devices. As a result of EPT, inhomogeneities in the form of chromium carbide inclusions appear on the surface of AISI 304 steel samples; their size and quantity decrease with increasing treatment duration and become almost negligible after 10 min. For AISI 321 and AISI 316L steels, EPT primarily leads to surface smoothing through the removal of micro-irregularities without significant structural changes, while small, uniformly distributed titanium carbide particles up to 4 µm in size remain on the AISI 321 steel. The identified features of surface structure formation significantly affect the roughness: its most intensive change is observed at an EPT duration of 3–5 min, after which the dynamics decrease. Due to the relief formed by carbide inclusions, the roughness values of AISI 304 steel samples are higher than those of AISI 316 and AISI 321 steel samples. At voltages of 260–320 V, the roughness parameters remain stable; however, at 340 V, a deterioration in surface quality is observed due to the transition to an electrolytic-discharge mode. With an increase in EPT duration, the corrosion potential of all the studied corrosion-resistant steels shifts to the positive region, and the corrosion current density decreases by 6–7 times. The greatest improvements are observed for AISI 316L steel – the corrosion potential increases from ~184 to ~98 mV. The wetting contact angle increases sharply from ~58° to ~84° after 1–3 min of treatment, then stabilizes in the range of 85–88°, indicating an increase in surface hydrophobicity.

1. Sojitra P., Engineer Ch., Raval A., Kothwala D., Jariwala A., Kotadia H., Adeshara S., Mehta G. (2009) Surface Enhancement and Characterization of L-605 Cobalt Alloy Cardiovascular Stent by Novel Electrochemical Treatment. Artificial Organs, 23 (2), 55–64.

2. Rozhnova O. M., Pavlov V. V., Sadovoy M. A. (2015) Biological Compatibility of Metal-Based Medical Devices and Causes of Pathological Reactivity (Review). Bulletin of Siberian Medicine, 14 (4), 110–118. https://doi.org/10.20538/1682-0363-2015-4-110-118 (in Russian).

3. Zhang W., Li Z., Xu C., Chai M., Dong P. (2023) Surface Characteristics of NiTi Cardiovascular stents by Selective Laser Melting and Electrochemical Polishing. International Journal of Advanced Manufacturing Technology, 130 (1–2), 623–634. https://doi.org/10.1007/s00170-023-12734-x.

4. Burstein G., Vines S. (2001) Repetitive Nucleation of Corrosion Pits on Stainless Steel and the Effects of Surface Roughness. Journal of The Electrochemical Society, 148 (12), 504–516. https://doi.org/10.1149/1.1416503.

5. Lee S. M., Lee W. G., Kim Y. H., Jang H. (2012) Surface Roughness and Corrosion Resistance of 21Cr Ferritic Stainless Steel. Corrosion Science, 63, 404–409. https://doi.org/10.1016/j.corsci.2012.06.031.

6. Zelenina T. G., Fedchishin O. V., Trofimov V. V., Mansurova L. A., Smolyanko L. E. (2009) Investigation of biocompatible properties of implant materials. Siberian Medical Journal (Irkutsk), 90 (7), 93–94 (in Russian).

7. Dibra A., Kastrati A., Mehilli J., Pache J., von Oepen R., Dirschinger J., Schömig A. (2005) Influence of Stent Surface Topography on Outcomes After Coronary Stenting. Catheterization and Cardiovascular Interventions, 65 (3), 374–380. https://doi.org/10.1002/ccd.20400.

8. De Scheerder I., Wang K., Sohier J., Verbeken E., Zhou X. R., Frooyen L., Van Humbeeck J., Van de Werf F. (1998) Metallic Surface Treatment by Electrochemical Polishing Reduces Thrombogenicity and Neointimal Hyperplasia After Stent Implantation. Journal of the American College of Cardiology, 31 (S1), 277. https://doi.org/10.1016/S0735-1097(98)81848-2.

9. Tepe G., Wendel H. P., Khorchidi S., Schmehl J., Wiskirchen J., Pusich B., Claussen C. D., Duda S. H. (2002) Thrombogenicity of Various Endovascular Stent Types: an in Vitro Evaluation. Journal of Vascular and Interventional Radiology, 13 (10), 1029–1035. https://doi.org/10.1016/s1051-0443(07)61868-5.

10. Bandyopadhyay A., Mitra I., Goodman S. B., Kumar M., Bose S. (2023) Improving Biocompatibility for Next Generation of Metallic Implants. Progress in Materials Science, 133, 101053. https://doi.org/10.1016/j.pmatsci.2022.101053.

11. Amirtharaj Mosas K. K., Chandrasekar A. R., Dasan A., Pakseresht A., Galusek D. (2022) Recent Advancements in Materials and Coatings for Biomedical Implants. Gels, 8 (5), 323. https://doi.org/10.3390/gels8050323.

12. Duan X., Yang Y., Zhang T., Zhu B., Wei G., Li H. (2024) Research Progress of Metal Biomaterials for Cardiovascular Stents and Surface Treatment Methods. Heliyon, 10 (4), e25515. https://doi.org/10.1016/j.heliyon.2024.e25515.

13. Zaman H. A., Sharif S., Idris M. H., Kamarudin A. (2015) Metallic Biomaterials for Medical Implant Applications: a Review. Applied Mechanics and Materials, 735, 19–25. https://doi.org/10.4028/www.scientific.net/AMM.735.19.

14. Korolyov A., Bubulis A., Vėžys J., et al. (2021). Electrolytic Plasma Polishing of NiTi Alloy. Mathematical Models in Engineering, 7 (4), 70–80. https://doi.org/10.21595/mme.2021.22351.

15. Lisovskaya Yu. O., Alekseev Yu. G., Korolyov A. Yu., Niss V. S., Fomikhina I. V. (1998) Study of the Structure, Surface Morphology, Roughness Parameters and Corrosion Resistance of the Surface Layer of Stainless Steel During Electrolytic-Plasma Treatment. Svarka i rodstvennye tekhnologii: Resp. mezhvedomstv. sb. nauch. tr [Welding and related technologies: Republican interdepartmental collection of scientific papers]. Minsk, Iss. 9, 63–69 (in Russian).

16. Ji G., Ma L., Zhang S., Zhang J., Wu L. (2025) Study of Electrochemical Behavior and a Material Removal Mechanism During Electrolytic Plasma Polishing of 316L Stainless Steel. Materials, 18 (6), 1307. https://doi.org/10.3390/ma18061307

17. Zatkalíková V., Podhorský Š., Štrbák M., Liptáková T., Markovičová L., Kuchariková L. (2022) Plasma Electrolytic Polishing—An Ecological Way for Increased Corrosion Resistance in Austenitic Stainless Steels. Materials, 15 (12), 4223. https://doi.org/10.3390/ma15124223

18. Korolyov A. Yu., Tomilo V. A. (2024). Electrolytic Plasma Polishing of Metallic Materials for Medical Purposes. Aktual'nye problemy prochnosti: materialy LXVIII mezhdunarodnoi nauchnoi konferentsii: Vitebsk, 27–31 maya 2024 g. [Current Strength Issues: Proceedings of the LXVIII International Scientific Conference: Vitebsk, May 27-31, 2024]. Minsk, 2024, 328–330 (in Russian).

19. Zeidler H., Boettger-Hiller F., Edelmann J., Schubert A. (2016) Surface Machining of Medical Parts Using Plasma Electrolytic Polishing. Procedia CIRP, 49, 83–87. https://doi.org/10.1016/j.procir.2015.07.038.

20. Kulikov I. S., Vashchenko S. V., Kamenev A. Ya. (2010) Electrolytic-Plasma Processing of Materials. Minsk, Belaruskaya Navuka Publ. 232 (in Russian).

21. Smyslov A. M., Smyslova M. K., Mingazhev A. Dz., Selivanov K. S. (2009) Multistage Elektrolitplasma Processing of Products From the Titan and Titanic Alloys. Vestnik USATU, 13 (1), 141–145 (in Russian).

22. Navickaitė K., Ianniciello L., Tušek J., Engelbrecht K., Bahl C. R. H., Penzel M., Nestler K., Böttger-Hiller F., Zeidler H. (2021) Plasma Electrolytic Polishing of Nitinol: Functional Properties. Materials, 14 (21), 6450. https://doi.org/10.3390/ma14216450.

23. Alekseev Yu. G., Korolyov A. Yu., Niss V. S. (2019) Electrolytic-Plasma Polishing of Biomedical Co–Cr alloys. Vestsi Natsyyanal’nai akademii navuk Belarusi. Seryya fizika-technichnych navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-technical series, 64 (3), 296–303. https://doi.org/10.29235/1561-8358-2019-64-3-296-303 (in Russian).

24. Aliakseyeu Y., Bubulis A., Minchenya V., Korolyov A., Niss V., Kandrotaitė Janutienė R. (2021) Plasma Electrolyte Polishing of Ti and Nb Alloys. Mechanika, 27 (1), 88–93. https://doi.org/10.5755/j02.mech.25044.

25. Sinkevich Yu. V., Sheleg V. K., Yankovsky I. N., Belyaev G. Ya. (2014) Electropulse Polishing of Fe-Cr-Ni Alloys. Minsk, BNTU. 325 (in Russian).

26. Dhaiveegan P., Elangovan N., Nishimura T., Rajendran N. (2016) Corrosion Behavior of 316L and 304 Steels in Multiple Environments. RSC Advances, 6 (53), 47314–47324. https://doi.org/10.1039/C6RA04015B.

27. Osipovich K., Kalashnikov K., Vorontsov A. (2019) Alloying Effect of Ti-6Al-4V on 321 Steel Processed by EBAM. IOP Conference Series: Materials Science and Engineering, 537 (2), 022075. https://doi.org/10.1088/1757-899X/537/2/022075.

28. Rybalko K. V., Beketayeva L. A., Davydov A. D. (2014) Estimation of corrosion Current by the Analysis of Polarization Curves: Electrochemical Kinetics Mode. Russian Journal of Electrochemistry, 50 (2), 108–113. https://doi.org/10.1134/s1023193514020025.

29. Rashid M. W. A., Gakim M., Rosli Z. M., Azam M. A. (2012) Formation of Cr23C6 during sensitization of AISI 304 steel. International Journal of Electrochemical Science, 7 (10), 9465–9477. https://doi.org/10.1016/s1452-3981(23)16211-0.

30. White G. K., Woods S. B. (eds.). (1982) Landolt-Börnstein: Metals – Electronic Transport Phenomena. New York, Springer. 337 p.

31. Padilha A. F., Rios P. R. (2002) Decomposition of Austenite in Stainless Steels. ISIJ International, 42 (4), 325–337. https://doi.org/10.2355/isijinternational.42.325.

32. Cramer S. D., Covino B. S. (eds.). (2003) Corrosion: Fundamentals, Testing, and Protection. ASM Handbook. Vol. 13A. ASM International. 1118 https://doi.org/10.31399/asm.hb.v13a.9781627081825.