Preview

PECULIAR FEATURES OF MACHINING MARKS FORMATION ON SURFACE ОF TITANIUM SPECIMEN WITH SINGLE ELECTRO CONTACT ACTION OF WIRE ELECTRODE-TOOL

Abstract

The paper presents an investigation of shape and geometry parameters of machining marks obtained on the surface of titanium specimen with a single electro contact action of a wire electrode-tool. A description of the developed unit and methodology for execution of experimental investigations has been given in the paper. The paper provides and analyzes experimentally obtained data showing the effect of conditions and modes of single electro contact action of wire tool-electrode on the shape and geometrical parameters of machining marks obtained on the surface of titanium specimen. It is shown that the formation of these traces occurs in the context of joint action of both the electrical erosion and mechanical action of the working part of the wire electrode-tool on the surface of the titanium specimen that expands technological capabilities of electro contact treatment while  solving problems associated with targeted modification of the original work-piece surfaces.

About the Authors

M. G. Kiselev
Belarusian National Technical University
Belarus


A. V. Drozdov
Belarusian National Technical University
Belarus


S. G. Monich
Belarusian National Technical University
Belarus


P. S. Bogdan
Belarusian National Technical University
Belarus


References

1. Модификация поверхности титановых имплантатов и ее влияние на их физико-химические и биомеханические параметры в биологических средах / В. В. Савич [и др.] ; под науч. ред. В. В. Савича. – Минск : Беларус. навука, 2012. – 244 с.

2. Киселев, М. Г. Применение электроконтактной виброударной обработки для модификации образцов титановых имплантатов / М. Г. Киселев, А. В. Дроздов, В. А. Борисов // Сб. докл.

3. Междунар. симпозиума «Инженерия поверхности. Новые порошковые композиционные материалы. Сварка». – Минск, 2011. – С. 53–57.

4. Киселев, М. Г. Исследование явления переноса материала с инструмента на обрабатываемую поверхность имплантата при его электроконтактной обработке с ультразвуком / М. Г. Киселев, А. В. Дроздов, В. А. Борисов // Материалы 7-й Междунар. науч.-техн. конф. «Современные методы и технологии создания и обработки материалов». – Минск, 2012. – С. 88–93.

5. Теоретическое обоснование рациональных параметров режима электроконтактной обработки проволоч-ного инструмента / М. Г. Киселев [и др.] // Вестник ГГТУ имени П. О. Сухого. – 2012. – № 3. – С. 3–10.

6. Модификация исходной поверхности проволочного инструмента с целью придания ей режущей способности путем применения электроконтактной обработки / М. Г. Киселев [и др.] // Вестник Белорусско-Российского университета. – 2012. – № 1 (34). – С. 13–22.


Review

For citations:


Kiselev M.G., Drozdov A.V., Monich S.G., Bogdan P.S. PECULIAR FEATURES OF MACHINING MARKS FORMATION ON SURFACE ОF TITANIUM SPECIMEN WITH SINGLE ELECTRO CONTACT ACTION OF WIRE ELECTRODE-TOOL. Science & Technique. 2013;(2):23-27. (In Russ.)

Views: 616


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2227-1031 (Print)
ISSN 2414-0392 (Online)