DRIVEN POLYSTRONG REINFORCED CONCRETE PILES AND NEW DESIGN OF PILE CAPS
Abstract
The paper presents constructional and technological features for manufacturing driven piles with variable strength of pile shaft. Economical efficiency of their production has been shown in the paper. The paper provides a pile cap design that ensures perception of hammer impacts with the help of lateral edges of the pile cap. Driven reinforced concrete piles which are manufactured from three shaft sections having various strength have been proposed in the paper. Material strength (concrete grade and diameter of bars) and length of shaft sections are given on a case by case basis in accordance with nature and rate of stresses in piles during their driving process. Manufacturing of polystrong piles provides an opportunity to select them for a particular construction site with due account of their preservation during driving process.
A pile cap has been developed that as opposed to existing analogous designs makes it possible to transmit impact efforts from a hammer to the pile through lateral surface of its head part. The pile cap provides the possibility to increase an area for perception of hammer impact efforts by the pile and in doing so it is possible significantly to reduce a damage risk and destruction of pile concrete during its driving. Application of polystrong piles and their driving with the help of new pile cap are considered as a basis for defect-free and resource-saving technology for pile foundations in the construction.
About the Authors
I. I. Bekbasarov
Taraz State University named after M. Kh. Dulati
Kazakhstan
Kazakhstan
Professor, PhD in Engineering
G. I. Isakov
Taraz State University named after M. Kh. Dulati
Kazakhstan
Master of Engineering
Kazakhstan
Master of Engineering
References
1. Rodov, G. S., Kurbatov, L. G., Kuprianov, V. S., Khazanov, M. Ia. (1979). Driven piles with reinforced concrete shaft and steelfibre-reinforced concrete head. Proceedings of Workshop on quality improvement of zero cycle. Leningrad, 54–62 (in Russian).
2. Bartolomey, A. A., Bekbasarov, I. I. (1984). On dynamic compression pressures initiated in piles during their driving in sub-foundation. Osnovaniya i fundamenty v geologicheskikh usloviyakh Urala. Mezhvuzovskiy sbornik nauchnykh trudov [Foundation Engineering in Geological Conditions of the Urals. Inter University Collection of Scientific Papers]. Perm: Perm. Polytechnic. Inst., 6–12 (in Russian).
3. Bekbasarov, I. I. (2011). Fundamentals of rational driving of reinforced concrete piles in sub-foundation. Taraz: Taraz University. 155 p. (in Russian).
4. Bekbasarov, I. I., Isakov, G. I. (2011). Principles for creation of poly concrete and reinforced concrete piles. Materialy XIII stud. nauch.-prakt. konf. Tar GU imeni M. Kh. Dulati po estestvennym, tekhnicheskim, sotsial'no-gumanitarnym i ekonomicheskim naukam, posviashchennoi 20-letiiu nezavisimosti Respubliki Kazakhstan [Proceedings of XIII Student Scientific and Practical Conference on Natural, Engineering, Social and Human and Economic Sciences organized by Taraz State University named after M. Kh. Dulati and dedicated to 20th Anniversary of Independence of the Republic of Kazakhstan]. Taraz: Taraz University, 141–142 (in Russian).
5. Bekbasarov, I. I., Isakov, G. I.(2012). Poly-strong and poly-concrete piles. Sbornik tezisov V Vsemir. kongr. inzhiniringa i tekhnologii WCET–2012 «Nauka i tekhnologii: shag v budushchee» [Abstract Book of V World Congress of Engineering and Technologies WCET–2012 “Science and Technologies: Step into the Future»]. Almaty, 82–84 (in Russian).
6. Bekbasarov, I. I., Isakov, G. I. (2011). Driven pile with variable strength and technological principles of their manufacturing. Materialy VII Mezinarodni Vedecko-Prakticka Konfrence “Vedecky Prumysl Evropskeho Kontinentu – 2011”. Dil 26 Technicke Vedy, Vystavba a Architectura. Praha, Publishing House “Education and Science”, 72–75 (article in Russian ; title of the book in Czech).
7. Bekbasarov, I. I., Isakov, G. I., Saimbetova, B. T. (2012). Manufacturing technology and technical and economic indicators of poly-strong piles. Materialy VIII Mezinarodni Vedecko-Prakticka Konfrence “Efektivni Nastroje Modrnich Ved – 2012”. Dil 31 Vystavba a architectura Technicke vedy. Praha, Publishing House “Education and Science”, 69-73 (article in Russian ; title of the book in Czech).
8. Bekbasarov, I. I., Baiteliev, R. T., Shilibekov, S. K., Isakov, G. I. (2014). New prospective resource-saving pile structures. Vestnik Permskogo natsional'nogo issledovatel'skogo politekhnicheskogo universiteta. Stroitel'stvo i arkhitektura [Bulletin of Perm National Research Polytechnic University. Construction and architecture], 4, 81–92 (in Russian).
9. Manual on execution and acceptance of works during foundation engineering. Moscow, Stroyizdat, 1977. 241 p. (in Russian).
10. Abbasov, P. A., Tsoi, L. B. (1988). Shock-proof reinforced concrete pile and cap for its sinking. Sovremennye problemy svainogo fundamentostroeniia v SSSR : cb. tezisov dokladov Vsesoiuznogo soveshchaniia-seminara [Abstracts of All-Union Seminar-Meeting on Modern Problems of Pile Foundation Construction in the USSR], Perm: Perm. Polytechnic. Inst., 136–137 (in Russian).
11. Abbasov, P. A., Karkhalev, V. N., Tsoi, L. B. (1990). Shock-proof reinforced concrete piles, their manufacturing and sinking in the sub-foundation. Resource-saving technologies for foundation construction using prefabricated piles. Moscow, Stroyizdat, 87–93 (in Russian).
12. Isakov, G. I., Bekbasarov, I. I. (2011). Principles for creation of new cap design for driving reinforced concrete piles. Materialy XIII stud. nauch.-prakt. konf. Tar GU imeni M. Kh. Dulati po estestvennym, tekhnicheskim, sotsial'no-gumanitarnym i ekonomicheskim naukam, posviashchennoi 20-letiiu nezavisimosti Respubliki Kazakhstan [Proceedings of XIII Student Scientific and Practical Conference on Natural, Engineering, Social and Human and Economic Sciences organized by Taraz State University named after M. Kh. Dulati and dedicated to 20th Anniversary of Independence of the Republic of Kazakhstan]. Taraz: Taraz University, 142–143 (in Russian).
13. Bekbasarov, I. I., Isakov, G. I.(2011). Cap for pile driving. ??terial? VII Mezinarodni Vedecko-Prakticka Conference “Vedeck? Prumsul Evropskeho Kontinentu – 2011”. Praha, Publishing House “Education and Science”, 72–75 (article in Russian ; title of the book in Czech).
Review
For citations:
Bekbasarov I.I., Isakov G.I. DRIVEN POLYSTRONG REINFORCED CONCRETE PILES AND NEW DESIGN OF PILE CAPS. Science & Technique. 2015;(2):47-54. (In Russ.)
Views:
799
Email this article 