Preview

НАУКА и ТЕХНИКА

НАУКА и ТЕХНИКА

Расширенный поиск

Волюметрическое проектирование асфальтобетонного каркаса для интеграции информационных слоев

https://doi.org/10.21122/2227-1031-2026-25-4-318-327

Аннотация

Статья посвящена разработке комплексного математического аппарата для определения предельно допустимого объемного содержания информационных агентов (сенсоров, меток) в структуре асфальтобетонных покрытий без снижения их каркасной стабильности. В основу исследования положены принципы теории упаковки дискретных сред Ф. де Ларрарда, методология пространственного проектирования Бейли и концепция стесненной перколяции. Для устранения систематической погрешности при сопоставлении международных стандартов проведена геометрическая нормализация размеров отверстий контрольных сит. В качестве инструмента идентификации локальных экстремумов распределения минеральных компонентов предложен авторский критерий – дифференциальный модуль каркасности. Установлено аналитическое уравнение для расчета эффективного геометрического резерва каркаса относительно кривой максимальной плотности Фуллера. Математически доказано формирование волюметрического плато в каркасных смесях прерывистой гранулометрии при значениях коэффициента структурной асимметрии более 3,0. Практическим итогом исследования стала разработка универсальной номограммы, устанавливающей функциональную зависимость между эквивалентным диаметром носителя информации и предельной информационной емкостью асфальтобетона для различных групп крупности заполнителя. Установлено, что плотные асфальтобетонные смеси непрерывной гранулометрии непригодны для создания реконфигурируемых слоев из-за критической стесненности порового пространства. Доказано, что высококаркасные системы обладают структурной инвариантностью в микро- и мезодиапазонах, позволяя безопасно интегрировать распределенные функциональные компоненты, что делает их оптимальными для инфраструктуры автономного вождения.

Об авторах

А. А. Афанасенко
Белорусский национальный технический университет
Беларусь

Минск, Республика Беларусь



П. П. Яцевич
Белорусский национальный технический университет
Беларусь

Адрес для переписки:
Яцевич Павел Петрович
Белорусский национальный технический университет
пр. Независимости, 65,
220013, г. Минск, Республика Беларусь
Тел.: +375 17 338-78-40
cniidsgm@bntu.by



Список литературы

1. Di Graziano A., Marchetta V., Cafiso S. (2020) Structural Health Monitoring of Asphalt Pavements Using Smart Sensor Networks: A Comprehensive Review. Journal of Traffic and Transportation Engineering (English Edition). 7 (5), 639–651. https://doi.org/10.1016/j.jtte.2020.08.001

2. Braunfelds J., Senkans U., Skels P., Janeliukstis R., Porins J., Spolitis S., Bobrovs V. (2022) Road Pavement Structural Health Monitoring by Embedded Fiber-Bragg-Grating-Based Optical Sensors. Sensors, 22 (12), 4581. https://doi.org/10.3390/s22124581

3. Borke Birgin H., D’Alessandro A., Favaro M., Sangiorgi C., Laflamme S., Ubertini F. (2022) Field Investigation of Novel Self-Sensing Asphalt Pavement for Weigh-in-Motion Sensing. Smart Materials and Structures, 31 (8), 085004. https://doi.org/10.1088/1361-665X/ac7922

4. Ye Z., Wei Y., Yang S., Li P., Yang F., Yang B., Wang L. (2024) IoT-Enhanced Smart Road Infrastructure Systems for Comprehensive Real-Time Monitoring. Internet of Things and Cyber-Physical Systems, 4, 235–249. https://doi.org/10.1016/j.iotcps.2024.01.002

5. Al-Hussein M., Hassan M., Dylla H. (2024) Smart Embedded Technologies and Materials for Enhanced Pavement Management. Automation in Construction, 168, 105865. https://doi.org/10.1016/j.autcon.2024.105865

6. Wang Y., Li J., Zhang X., Yao Y., Peng Y. (2024) Recent Development in Intelligent Compaction for Asphalt Pavement Construction: Leveraging Smart Sensors and Machine Learning. Sensors, 24 (9), 2777. https://doi.org/10.3390/s24092777

7. Cundall P. A., Strack O. D. L. (1979) A Discrete Numerical Model for Granular Assemblies. Géotechnique, 29 (1), 47–65. https://doi.org/10.1680/geot.1979.29.1.47

8. You Z., Adhikari S., Dai Q. (2008) Three-Dimensional Discrete Element Models for Asphalt Mixtures. Journal of Engineering Mechanics, 134 (12), 1053–1063. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:12(1053)

9. Buttlar W. G., You Z. (2001) Discrete Element Modeling of Asphalt Concrete: Microfabric Approach. Transportation Research Record. 1757 (1), 111–118. https://doi.org/10.3141/1757-13

10. De Larrard F., Sedran T. (2002) Mixture-Proportioning of High-Performance Concrete. Cement and Concrete Research, 32 (11), 1699–1704. https://doi.org/10.1016/S0008-8846(02)00861-X

11. De Larrard F. (2009) Concrete Optimisation with Regard to Packing Density and Rheology. 3rd RILEM international symposium on rheology of cement suspensions such as fresh concrete, Aug. 2009. Available at: https://hal.science/hal-00595686 (accessed 02 April 2026).

12. Kandhal P. S., Foo K. Y., Mallick R. B. (1998) Critical Review of Voids in Mineral Aggregate Requirements in Superpave. Transportation Research Record, 1609 (1), 21–27. https://doi.org/10.3141/1609-03

13. Tušar M., Ravnikar Turk M., Ržek L. (2022) A Triangular Representation of the Volumetric Properties of Asphalt Mixtures. Construction and Building Materials, 314, Part A, 125496. https://doi.org/10.1016/j.conbuildmat.2021.125496

14. Lees G. (1970) The Rational Design of Aggregate Gradings for Dense Asphaltic Compositions. Proceedings of the Association of Asphalt Paving Technologists, 39, 60–97.

15. Olard F., Perraton D. (2010) On the Optimization of the Aggregate Packing Characteristics for the Design of High-Performance Asphalt Concretes. Road Materials and Pavement Design, 11 (suppl. 1), 145–169. https://doi.org/10.1080/14680629.2010.9690330

16. Abhijith B. S., Chakkoth U., Krishnan J. M. (2020) Influence of Aggregate Gradation on Laboratory Rutting Performance of Hot-Mix Asphalt Mixtures. Mathew T., Joshi G., Velaga N., Arkatkar S. (eds). Transportation Research: Proceedings of CTRG 2017. Lecture Notes in Civil Engineering, Vol. 45. Singapore, Springer, 857–867. https://doi.org/10.1007/978-981-32-9042-6_68

17. Venudharan V., Biligiri K. P. (2020) Investigation on Rutting Performance of Gap-Graded Asphalt Mixtures: Study on Aggregate Gradation. Mathew T., Joshi G., Velaga N., Arkatkar S. (eds). Transportation Research: Proceedings of CTRG 2017. Vol. 45. Singapore, Springer, 781–791. https://doi.org/10.1007/978-981-32-9042-6_62

18. Prowell B. D., Zhang J., Brown E. R. (2005) Aggregate Properties and the Performance of Superpave-Designed Hot Mix Asphalt. NCHRP Report 539. Washington, DC, Transportation Research Board. https://doi.org/10.17226/13844

19. Asphalt Institute (2001) Superpave Mix Design. Superpave series; SP-2. 3rd ed. Lexington, KY, Asphalt Institute. 128.

20. Vavrik W. R., Huber G., Pine W. J., Bailey R. (2002) Bailey Method for Gradation Selection in Hot-Mix Asphalt Mixture Design. Washington, DC, Transportation Research Board. Available at: https://onlinepubs.trb.org/onlinepubs/circulars/ec044.pdf

21. Vavrik W. R., Pine W. J., Huber G. A., Carpenter S. H., Bailey R. (2001) The Bailey Method of Gradation Evaluation: The Influence of Aggregate Gradation and Packing Characteristics on Voids in the Mineral Aggregate. Journal of the Association of Asphalt Paving Technologists, 70, 132–175.

22. Aurilio V., Pine W. J., Lum P. (2005) Bailey Method – Achieving Volumetrics and HMA Compactability. Proceedings of the Fiftieth Annual Conference of the Canadian Technical Asphalt Association (CTAA), Victoria, British Columbia, Nov. 2005. Laval, Polyscience Publications, 159–183.

23. Zaniewski J. P., Mason C. (2006) An Evaluation of the Bailey Method to Predict Voids in the Mineral Aggregate. Final Report. Morgantown, West Virginia Univ., Dept. of Civil and Environ. Eng. 73 p.

24. Vavrik W. R. (2000) Asphalt Mixture Design Concepts to Develop Aggregate Interlock [Dissertation]. Urbana, Illinois. 172.

25. Yaghoubi E., Mansourkhaki A. (2010) Evaluation of the Bailey Method to Improve Permanent Deformation Resistance of Conventional Hot Mix Asphalt Used in Binder and Surface Course. Proceedings of the 11th International Conference on Asphalt Pavements, Vol. 3. Nagoya, Japan, 2410–2419.

26. Othman K. (2021) Evaluation of the Hot Asphalt Mix Aggregate Gradation Using Bailey Method: State-of-the-Art. JES. Journal of Engineering Sciences, 49 (4), 446–475. https://doi.org/10.21608/jesaun.2021.71249.1047

27. Sulaiman I. D., Abed J. M., Al-Saffar Z. H. (2023) Improving the Gradation of Aggregate Used in Asphalt Mixtures Using Bailey Method. NTU Journal of Engineering and Technology, 2 (3), 34–42. https://doi.org/10.56286/ntujet.v2i3.678

28. Manjunath K. R., Poornachandra Dev N. B. (2014) Design of Hot Mix Asphalt Using Bailey Method of Gradation. International Journal of Research in Engineering and Technology, 3 (6), 386–392. https://doi.org/10.15623/ijret.2014.0306072

29. Thompson G. (2006) Investigation of the Bailey Method for the Design and Analysis of Dense-Graded HMAC Using Oregon Aggregates. Final Report. Salem, Oregon Dept. of Transportation, Research Unit. 44.

30. Daniel J. S., Rivera F. (2009) Application of the Bailey Method to New Hampshire Asphalt Mixtures. Final Report. Durham, Univ. of New Hampshire, Dept. of Civil Eng. 185.

31. Afanasenka A. А. (2024) Optimization of Aggregate Composition of Asphalt Concrete Mixtures to Ensure Maximum Density. Nauka i Tehnika = Science & Technique, 23 (3), 235–241 (in Russian). https://doi.org/10.21122/2227-1031-2024-23-3-235-241


Рецензия

Для цитирования:


Афанасенко А.А., Яцевич П.П. Волюметрическое проектирование асфальтобетонного каркаса для интеграции информационных слоев. НАУКА и ТЕХНИКА. 2026;25(4):318-327. https://doi.org/10.21122/2227-1031-2026-25-4-318-327

For citation:


Afanasenka A.A., Yatsevich P.P. Volumetric Design of Asphalt Concrete Skeleton for Information Layer Integration. Science & Technique. 2026;25(4):318-327. https://doi.org/10.21122/2227-1031-2026-25-4-318-327

Просмотров: 6840

JATS XML


Creative Commons License
Контент доступен под лицензией Creative Commons Attribution 4.0 License.


ISSN 2227-1031 (Print)
ISSN 2414-0392 (Online)