STUDY OF INFLUENCE OF NANO-SIZE ADDITIVES ON MECHANICAL BEHAVIOUR OF CEMENT STONE
Abstract
The influence of adding carbon nanomaterials (CNM) to a cement stone on mechanical properties of the latter has been studied. Two test methods have been applied: nanoindentation and ultrasonic testing. Results obtained show that there is some uncertainness on influence of CNM on mechanical properties of cement stone due to deviation of measurements.
About the Authors
J. Eberhardsteiner
Vienna University of Technology
Austria
Institute for Mechanics of Materials and Structures
Austria
Institute for Mechanics of Materials and Structures
S. Zhdanok
Heat and Mass Transfer Institute, National Academy of Science of Belarus
Belarus
Belarus
B. Khroustalev
Belarusian National Technical University
Belarus
Belarus
E. Batsianouski
Belarusian National Technical University
Belarus
Belarus
S. Leonovich
Belarusian National Technical University
Belarus
Belarus
P. Samtsou
Heat and Mass Transfer Institute, National Academy of Science of Belarus
Belarus
Belarus
References
1. Zhdanok, S. A. Method of obtaining of carbon nanomaterial: Patent of the Republic of Belarus / S. A. Zhdanok, A. P. Solntsev, A. V. Krauklis. – No. 10010, 31.03.2005, MPK SO1B31/00.
2. Kohlhayser, C. Transmission Contact Pulse for Elastic Wave Velocity and Stiffness Determination Ultrasonic: Influ ence of Specimen Geometry and Porosity, PhD thesis / C. Kohlhayser; Vienna University of Technology. – Vienna, Austria, 2009.
Review
For citations:
Eberhardsteiner J., Zhdanok S., Khroustalev B., Batsianouski E., Leonovich S., Samtsou P. STUDY OF INFLUENCE OF NANO-SIZE ADDITIVES ON MECHANICAL BEHAVIOUR OF CEMENT STONE. Science & Technique. 2012;(1):52-55. (In Russ.)
Views:
1620
Email this article 