Preview

Science & Technique

Advanced search

Current State and Prospects for Development of Head Lighting for Vehicles. Part 1. Standardization and Generally Used Vehicle Headlamp Designs

https://doi.org/10.21122/2227-1031-2023-23-1-60-68

Abstract

The main task of head lighting (headlights) of vehicles is to illuminate the road in front of it to ensure road safety. The design principles of vehicle headlights have remained unchanged for 50–60 years, but modern vehicles themselves differ

significantly from their counterparts half a century ago.  Modern cars are faster, have lower overall height and weight, which makes it difficult for drivers to ensure road safety at night: the driver needs to see farther in order to respond in time to changing traffic conditions, which is an indirect reason for the increase in headlight intensity. Due to the low landing, drivers are much more likely to be blinded by the headlights of passing and oncoming vehicles, which leads to traffic accidents. The distribution of the luminous intensity of headlights of vehicles (especially dipped beam headlights) has a sharp cut-off line, however, due to the high luminous intensity of the headlights and their low placement, even diffused light can cause blinding. Therefore, the requirements for the sharpness of the cut-off line of the standard headlight  distribution are becoming more stringent all the time. To meet these  requirements, modern headlight manufacturers use different approaches (the use of projection systems,LED matrices, etc.), but due to the lack of generally accepted efficiency criteria and the strong differences in vehicle design, the structures turn out to be too heavy, have low reliability and service life, and inefficient in using the energy of light source. This paper provides a brief overview of the most frequently used headlight designs and how to generate a standard European continental headlight distribution. Based on the review, the main problems of widely used head lighting designs are identified and the task is set to formulate requirements and recommendations for the design of promising types of head lighting for vehicles.

About the Authors

S. P. Sernov
Belarusian National Technical University
Belarus

Minsk



D. V. Balokhonov
Belarusian National Technical University
Belarus

Address for correspondence: 
Balokhonov Dmitry V. –
Belаrusian National Technical University,
65, Nezavisimosty Ave.,  220013, Minsk, Republic of Belarus.
Tel.: +375 17 293-95-26

balokhonov@bntu.by



L. M. Konicheva
“Rudensk” Open Joint Stock Company, Testing Laboratory
Belarus

Rudensk



References

1. Paine M., Paine D., Haley J., Cockfield S. (2010) Daytime Running Lights for Motorcycles. Optusnet. Available at: http://members.optusnet.com.au/carsafety/esv19_paine_mc_drl.pdf. (accessed 10 May 2022).

2. Larson M. V. (2021) The Dangers of Overly Bright Head-lights at Night. Larson Law Firm P.C. Available at: https://ndakotalaw.com/the-dangers-of-overly-bright-headlights-at-night ( accessed 01 September 2022).

3. Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Ve-hicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these United Nations Regulations. Addendum 148 – UN Regulation No 149. Uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehi-cles. UNECE (2019). Available at: https://unece.org/sites/default/files/2021-05/R149e.pdf. (accessed 10 May 2022).

4. Kazantsev S. (1017) Теst 8 LED lenses, Part 2. LED lamps for cars. Test, reviews, feedback, comparisons. Available at: http://led-obzor.ru/test-8-svetodiodnyih-linz-chast-2 (ac-cessed 10 May 2022) (in Russian).

5. Sabhadiya J. (2021) 7 Types of Headlights with Their Pros and Cons. Engineering Choice. Available at: https://www.engineeringchoice.com/author/jigneshsabhadiya/ (accessed 02 September 2022).

6. Ming-Jhih Shih (2011) Vehicle headlight capable of com-pensating for light intensity of dark region. Patent US 8029176 B2. Available at: https://patentimages.storage.googleapis.com/3e/a1/87/b3eaf1b113cdba/US8029176.pdf (accessed 10 May 2022).

7. Yamazaki H., Minakawa N., Yokoi S. (2013) Automotive headlamp. Patent US 2013/0258695. Available at: https://patentimages.storage.googleapis.com/87/21/7f/4f80334391ad5b/US20130258695A1.pdf (accessed 10 May 2022).

8. Maida J. (2022) Automotive LED Headlamps Market by Application (passenger cars, commercial vehicles, and oth-ers) and Geography (APAC, North America, Europe, South America, and MEA) - Forecast and Analysis 2020–2024. Technavio. Available at: https://www.technavio.com/report/automotive-led-headlamps-market-industry-analy-sis?utm_source=prnewswire&utm_medium=pressrelease&utm_campaign=T50(DCVO)_report_wk29_2022_006&utm_content=IRTNTR40893 (accessed 01 September 2022).

9. Hitch J. (2022) Giving LEDs some TLC: Inspection and diagnostic best practices. Fleet Maintenance. Available aat: https://www.fleetmaintenance.com/equipment/battery-and-electrical (accessed 01 September 2022).

10. Peck J. P., Thomas C. D., Natividad F. J. (2016) LED re-flector optic for an automotive headlight. Patent US 9482404 Available at: https://patentimages.storage.googleapis.com/6b/4d/b6/b040df43f91ec3/US9482404.pdf (accessed 10 May 2022).


Review

For citations:


Sernov S.P., Balokhonov D.V., Konicheva L.M. Current State and Prospects for Development of Head Lighting for Vehicles. Part 1. Standardization and Generally Used Vehicle Headlamp Designs. Science & Technique. 2023;22(1):60-68. (In Russ.) https://doi.org/10.21122/2227-1031-2023-23-1-60-68

Views: 383


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2227-1031 (Print)
ISSN 2414-0392 (Online)