Experimental Characteristics of Mechanical Continuously Variable Transmission with Internal Force Functions

The paper proposes a new type of a mechanical continuously variable transmission with internal force functions  to upgrade the energy efficiency of a vehicle equipped with a conventional engine. The prototype of the transmission is a well-known V. F. Maltsev concurrent pulse variator in which freewheel mechanism driven members are supplemented with elastic torsions shafts. It is shown that the variator turns into a continuous transformer – a mechanical continuously variable transmission with internal force functions. There is an internal automaticity and continuity in the entire range of gear ratio changes. The configuration engineering solution is implemented in the engineering prototype. The aim of the research is experimental study of the properties and characteristics of such a mechanical continuously variable transmission. The kinematic configuration and the main structural dimensions of the engineering prototype are given. Special testing facility and measuring-and-recording equipment have been developed. A set of parameters to be recorded has been specified. The accuracy of their measurement is statistically estimated. The results of the experiments are presented in terms of output and input torque dependencies on the speed of the driven shaft. It is shown that the transmission characteristics in their dimensionless form (transformer ratio and efficiency) in the function of internal gear ratio are universal. The possibility of obtaining an infinite kinematic and significant power transmission ranges by independently changing the internal link oscillation range (level of the force function) and the rotation frequency of the drive shaft has been experimentally shown. The transmission  has high transforming and energy properties, which are higher than those of hydrodynamic gears.

1. Blagonravov A. A. (2005) Mechanical Continuously Variable Transmissions. Ekaterinburg, Publishing House of Ural Branch of the Russian Academy of Sciences. 202 (in Russian).

2. Blagonravov A. A., Yurkevich A. V. (2017) Improving the Energy Efficiency of Transport Vehicles Using Mechanical Continuously Variable Transmissions with Variable Power Functions. Zhurnal Avtomobilnykh Inzhenerov = Zurnal AAI, 103 (2), 18–21(in Russian).

3. Hailemariam N. H., Redda T. D. (2018) Design and Development of Power Transmission System for Green and Light Weight Vehicles: a Review. The Open Mechanical Engineering Journal, 12 (1), 81–94. https://doi.org/10.2174/1874155X01812010081.

4. Ehsani M., Gao Y., Emadi A. (2017) Modern Electric, Hybrid Electric and Fuel Cell Vehicles: Fundamentals, Theory and Design. CRCpress. https://doi.org/10.1201/9781420054002.

5. Azarov V. K., Kozlov A. V., Kutenev V. F., Terenchenko A. S. (2013) Economics of Modern and Advanced Car Designs in their Full Life Cycle. Zhurnal Avtomobilnykh Inzhenerov = Zurnal AAI, 78 (1), 46–48 (in Russian).

6. Sushkevich P. P. (2018) Transformation of the Global Automotive Industry. Nauka i Tekhnika = Science & Technique, 17 (5), 432–439. https://doi.org/10.21122/ 2227-1031-2018-17-5-432-439 (in Russian).

7. Kulikov I. A., Lezhnev L. Yu., Bakhmutov S. V. (2019) Comparative Study of the Energy Efficiency of Combined Power Plants Intended for Vehicles. Problemy Mashinostroeniya i Nadiozhnosty Mashin [Problems of Mechanical Engineering and Machine Reliability], (1), 15–25. https://doi.org/10.1134/S0235711919010103 (in Russian).

8. Kulikov I. A., Selifonov V. V., Filonov A. I. (2010) Search for Optimal Control of a Hybrid Power Plant of a Car According to the Criterion of Balance of its Ecological and Fuel-Economic Properties. Izvestiya MGTU MAMI [Proceedings of Moscow State Technical University], 10 (2), 44–51 (in Russian).

9. Kuznetsov A. G. (2015) Analysis of the Possibility of Engine Operation with Minimum Fuel Consumption. Izvestiya Vysshikh Uchebnykh Zavedeniy. Mashinostroenie = BMSTU Journal of Mechanical Engineering, 664 (7), 52–58 (in Russian).

10. Petrov V. A. (1986) Automatic Control of Continuously Variable Transmissions of Self-Propelled Machines. Moscow, Mashinostroenie Publ. 248 (in Russian).

11. Pavlovskaya O. O., Kondakov S. V., Nosenko L. S. (2013) Formation of an Ideal Traction Characteristic of a Wheeled Vehicle and an Economic Characteristic of an Internal Combustion Engine by Regulating an Electromechanical Transmission. Vestnik YuUrGU Seriya “Komp'yuternye Tekhnologii, Upravlenie, Radioelektronika” = Bulletin of the South Ural State University, Series “Computer Technologies, Control, Radioelectronics”, 3 (2), 64–73 (in Russian).

12. Bakhmutov S. V., Gusakov D. N. (2007) Investigation of the Possibilities of Optimizing Volumetric Hydraulic Transmission in Terms of Acceleration Dynamics and Fuel Efficiency. Izvestiya MGTU MAMI [Proceedings of Moscow State Technical University], 4 (2), 11–14 (in Russian).

13. Li С., Li H., Li Q., Zhang S., Yao J. (2019) Modeling, Kinematics and Traction Performance of No-Spin Mechanism Based on Roller-Disk Type of Traction Drive Continuously Variable Transmission. Mechanism and Machine Theory, 133, 278–294. https://doi.org/10.1016/j.mechmachtheory.2018.11.017.

14. Bertini L., Carmignani L., Frendo F. (2014) Analytical Model for the Power Losses in Rubber V-Belt Continuously Variable Transmission (CVT). Mechanism and Machine Theory, 78, 289–306. https://doi.org/10.1016/j.mechmachtheory.2014.03.016.

15. Chen X., Hang H., Wang W., Li Y. (2017) Design and Analysis of a Novel Wheel Type Continuously Variable Transmission. Mechanism and Machine Theory, 107, 13–26. https://doi.org/10.1016/j.mechmachtheory.2016.08.012.

16. Gulia N. V., Yurkov S. A. (2002) Adaptive Variator and its Capabilities. Experimental Test Results. Avotomobilnaya Promyshlennost [Automotive Industry], (3), 17–20 (in Russian).

17. Girutsky O. I., Tarasik V. P. (2013) Creation of Electronic Control Systems and Diagnostics of Hydro-Mechanical Transmissions of Mobile Machines: Stages, Ways and Prospects. Zhurnal Avtomobilnykh Inzhenerov = Zurnal AAI, (4), 18–23 (in Russian).

18. Leonov A. I., Dubrovskii A. F. (1984) Continuous Mechanical Stepless Non-Friction Transmissions. Moscow, Mashinostroenie Publ. 192 (in Russian).

19. Blagonravov A. A. (1977) Mechanical Stepless Transmissions of Non-Friction Type. Moscow, Mashinostroenie Publ. 143 (in Russian).

20. Blagonravov A. A., Yurkevich A. V., Tereshin A. V. (2014) Adjustable Internal Automaticity of Mechanical Continuously Variable Transformer. Vestnik Mashinostroeniya [Mechanical Engineering Bulletin], (2), 3–7 (in Russian).

21. Maltsev V. F. (1978) Mechanical Impulse Transmissions. Moscow, Mashinostroenie Publ. 367 (in Russian).

22. Blagonravov A. A., Yurkevich A. A., Yurkevich A. V., Tereshin A. V., Soldatkin V. A. (2015) Energy Characteristics of a Mechanical Rectifier of Continuously Variable Transmissions with Adjustable Internal Automaticity. Zhurnal Avtomobilnykh Inzhenerov = Zurnal AAI, 93 (4), 26–31 (in Russian).

23. Blagonravov A. A., Yurkevich A. V., Yurkevich A. А. (2017) Automatic Control of a Stepless Mechanical Transmission with an Internal Force Function. Russian Engineering Research, 37 (3), 185–188. https://doi.org/10.3103/s1068798x17030054.

24. Kosov V. P., Tereshin A. V. (2015) Test Bench for Experimental Research of a Mechanical Stepless Torque Transformer. Simvol Nauki [Science Symbol], 1 (9), 74–76 (in Russian).

25. Yurkevich A. V., Tereshin A. V., Soldatkin V. A. (2015) Modular Measuring and Computing System Performance. Innovatsionnaya Nauka [Innovative Science], 1 (10), 41–44.

26. Soldatkin V. A., Tereshin A. V., Yurkevich I. A. (2016) Technique for Experimental Determination of Rotation Frequency for Shafts of Mechanical Stepless Torque Transformer. Innovatsionnaya Nauka [Innovative Science], 2 (10), 114–116 (in Russian).

27. Telemetric Strain-Gauge Amplifier ТТ01: Operational Manual. Minsk, 2014. 15 (in Russian).

28. Soldatkin V. A. (2015) Estimation of Transmission Error of Measurement Results for Telemetric Strain Gauge ТТ01. Innovatsionnaya Nauka [Innovative Science], 2 (11), 120–121 (in Russian).

29. Revnyakov E. N., Vorontsov A. A., Vyaznikov M. V. (2007) Calculation Refinement of External Characteristics for Mechanical Continuously Variable Transmission. Vestnik Mashinostroeniya [Mechanical Engineering Bulletin], (10), 9–12 (in Russian).

30. Yurkevich A. V., Blagonravov A. A. [et al.] (2016) Experimental Study on Loading of Main Elements in Mechanical Stepless Torque Transformer, Substantiation of Choice for Range of Changes in the Internal Power Function: Report on Research and Technological Development (final). No РН 01201368139. ИКРБС АААА-Б16-216032150071-4. Kurgan. 156 (in Russian).

31. Grishkevich A. I. (1984) Design of Car Transmissions. Moscow, Mashinostroenie. 272 (in Russian).