Preview

Science & Technique

Advanced search

Diagnostics of Bridge Bed Sections and Approaches in Zones of Expansion Joints on Road Bridges

https://doi.org/10.21122/2227-1031-2021-20-1-10-15

Abstract

The object of the study is durability of expansion joints in bridge structures; the subject of the research is the vibration response of a structure obtained under conditions of natural operation. Diagnostics of the road bridge expansion joints has been carried out in order to identify characteristic dependences  between the value of structure vibration response and types of expansion joint designs during the period of their operation while taking into account the features of the bridge structure. For this purpose, we have tested the methodology for collecting and processing data on the vibration response of the structure under natural conditions of its operation. The paper presents results of data collection on the coverage topology which have been obtained while using three-dimensional scanning method. Data collection on the vibration response of the structure has been carried out by measuring the vibration velocity and deformation of the structure. The data obtained are analyzed. As a result of testing and analysis of the obtained data, the main characteristics have been revealed: the value of base unevenness, the amplitude of vibration velocity and vibration displacement of the structure elements. Two main parameters of the dynamic impact have been assigned, adjusted for the mass of a moving vehicle, which can be used as main parameter for assessing the magnitude of the dynamic impact. A comprehensive method for assessing the dynamic impact on bridge structures has been developed and proposed in the paper, and its use will make it possible to differentiate various designs of expansion joints according to the magnitude of the dynamic impact of vehicles. This, in its turn, will contribute to formulate new recommendations on the use of specific types of expansion joints for various categories of highway, which will increase operational durability of  expansion joints and the structure as a whole.

About the Authors

V. A. Hodyakov
Belarusian National Technical University
Belarus
Address for correspondence: Hodyakov Vyacheslav А. – Belаrusian National Technical University,  146а, Nezavisimosty Ave., 220114, Minsk, Republic of Belarus.  Tel.: +375 17 369-94-77    mit_bntu@tut.by


A. V. Kulan
Belarusian National Technical University
Belarus
Minsk


E. N. Savina
Belarusian National Technical University
Belarus
Minsk


I. L. Boiko
Belarusian National Technical University
Belarus
Minsk


V. A. Grechuhin
Belarusian National Technical University
Belarus
Minsk


References

1. Ovchinnikov I. I., Ovchinnikov I. G., Valiev Sh. N. (2013) Damage to Pavement Mating zones and Expansion Joints on Bridge Structures: Possible Causes and Methods for their Elimination. Naukovedenie [Science Studies], (6), 148 (in Russian).

2. Krotov R. G. (2019) Increasing the Durability of Expansion Joints on Bridge Spans in Condition of Heavy Traffic. Minsk, Belarusian National Technical University. 24 (in Russian).

3. Rubtsova T. A., Zverinsky V. A., Krotov R. G. (2013) Expansion Joint Design with Rubber-Metal Compensator КРМ-120 (KRM-120), Providing Movement up to 120 mm. Avtomobilnye Dorogi i Mosty [Highways and Bridges], (1), 54–58 (in Russian).

4. Botyanovskii A. A. (2016) Geodetic Works as Part of the Monitoring of Structures During Construction of a Traffic Intersection Above the Subway Tunnel in Minsk. Modernizatsiya i Nauchnye Issledovaniya v Transportnom Komplekse: Materialy Mezhdunarodnoi Nauchno-Prakticheskoi Konferentsii [Modernization and Scientific Research in the Transport Complex: Materials of the International Scientific and Practical Conference]. Perm, Perm National Research Polytechnic University, 253–255 (in Russian).

5. TKP [Technical Code of Common Practice] EN 1991-2–2009 (02250). Eurocode 1. Effects on Structures. Part 2. Transport Loads on Bridges. Minsk, Publishing House of Ministry of Architecture and Construction of the Republic of Belarus, 2010. 158 (in Russian).

6. Minsk Automobile Plant: Download Directories. Available at: http://maz.by/products/catalogs. (Accessed 14 April 2020) (in Russian).

7. State Standard 30412–96. Automobile Roads and Airfields. Methods for Measuring Unevenness of Substrates and Coatings. Moscow, Interstate Scientific and Technical Commission for Standardization and Technical Regulation in Construction, 1996. 10 (in Russian).

8. Khodyakov V. A. (2016) Generative Design. Innovatsionnye Resheniya Problem Ekonomiki Znanii Belarusi i Kazakhstana: Sb. Mater. Nauch.-Prakt. Konf., 13 Okt. 2016 g., Minsk [Innovative Solutions to the Problems of the Knowledge Economy of Belarus and Kazakhstan: Collection of Materials of Scientific and Practical Conference, October 13, 2016, Minsk]. Minsk, Belarusian National Technical University, 53–54 (in Russian).

9. Zolotukhin Yu. D. (1983) Testing of Building Structures. Minsk, Vysheyshaya Shkola Publ. 208 (in Russian).

10. Dolidze D. E. (1975) Testing of Structures and Structures. Moscow, Vysshaya Shkola Publ. 252 (in Russian).


Review

For citations:


Hodyakov V.A., Kulan A.V., Savina E.N., Boiko I.L., Grechuhin V.A. Diagnostics of Bridge Bed Sections and Approaches in Zones of Expansion Joints on Road Bridges. Science & Technique. 2021;20(1):10-15. (In Russ.) https://doi.org/10.21122/2227-1031-2021-20-1-10-15

Views: 2692


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2227-1031 (Print)
ISSN 2414-0392 (Online)