Preview

FEATURES OF CONTROLLING ELECTROPNEUMATIC VALVES OF ACTUATOR TO CONTROL ITS CLUTCH WITH ACCELERATION VALVE

https://doi.org/10.21122/2227-1031-2018-17-1-64-71

Abstract

The article deals with one of the ways to control an actuator of the automated clutch control system. The aim is to design control of the electropneumatic actuator, to control its coupling with the acceleration valve on the basis of experimental research as well as to provide rational parameters of the automated clutch control system for the robotic transmission. The feature of the system is an acceleration valve in the design of the electropneumatic actuator to control the clutch. New links demand to adjust the way to control the actuator. The connection of Pulse-Width Modulation (PWM) with single power supply pulses to control electropneumatic valves is substantiated. The quantitative characteristics of single control pulses and PWM ones are determined. The error of operation accuracy for various ways of the control of the electropneumatic actuator to control the clutch of the robotic transmission is determined. Obtained separate PWM area is designed to suppress the initial hysteresis when the rod of the clutch actuator is moved. An algorithm for the operation of a clutch control system is proposed, taking into account the use of two modes of operation of solenoid valves. A graphical interpretation of the clutch control algorithm is presented, which gives an idea of the location of the constant signal feeding zones to the solenoid valve, as well as the operation areas of the solenoid valve in PWM mode. The control algorithm of the clutch booster provides a mode of guaranteed absence of excess pressure in the pneumatic cylinder after releasing the clutch pedal, provided that two normally closed solenoid valves are used. This configuration of the electro-pneumatic clutch control system allows the use of an emergency clutch release system in case of voltage absence. The reference algorithm for filtering the array of data coming from the feedback sensor, as well as the numerical values of the delay caused by the presence of a filter, are given.

About the Authors

O. A. Yaryta
Kharkiv National Automobile and Highway University
Ukraine


M. G. Mychalevych
Kharkiv National Automobile and Highway University
Ukraine


D. N. Leontiev
Kharkiv National Automobile and Highway University
Ukraine


V. I. Klymenko
Kharkiv National Automobile and Highway University
Ukraine

Address for correspondence: Klymenko Valery I. Kharkiv  - National Automobile and Highway University, 25 Yaroslava Mudrogo str., 61002, Kharkiv, Ukraine. Tel.: +38 050 565-77-97    valeriy.klimenko@gmail.com



V. A. Bogomolov
Kharkiv National Automobile and Highway University
Ukraine


I. V. Gritsuk
Kherson State Maritime Academy
Ukraine


Y. B. Novikova
Kharkiv National Automobile and Highway University
Ukraine


References

1. Zakharik Y. M. (2003) Clutch actuators with electronic control. Avtomobil’naya Promyshlennost’ [Automotive Industry], (9), 28–30 (in Russian).

2. Catalog “Electromagnetic Pneumatic Valves of KEM type”. Association “Rodina”. Available at: http://www.rodinatech.ru (in Russian).

3. Bronshtein M. I. (2001) Electronic Control of the Engine, Transmission and Chassis of the Car. Kharkov, Kharkiv National Automobile and Highway University. 150 (in Russian).

4. Bukharin N. A., Prozorov V. S., Schukin M. M. (1973) Cars. Construction, Load Modes, Work Processes, Strength of Car Assemblies. Textbook for High Schools. Moscow, Mashinostroenie Publ. 504 (in Russian).

5. Girutskiy O. I., Esinovskiy-Lashkov Y. K., Polyak D. G. (2000) Electronic Control Systems for Car Aggregates. Moscow, Transport Publ. 213 (in Russian).

6. Rumyantseva L. A. (1975) Design of Automated Automobile Clutches. Moscow, Mashinostroenie Publ. 176 (in Russian).

7. Bogomolov V. O., Klimenko V. I., Mikhalevich M. G., Yarita O. O. (2015) Accelerator Valve. Pat. 109503 Ukraine (in Ukraine).

8. Bogomolov V. A., Klimenko V. I., Mikhalevich N. G., Yarita A. A. (2014) The Choice of the Method for Controlling the Work Process and the Construction of an Algorithm for Controlling the Electro-Pneumatic Clutch Drive. Vіsnik Kharkіvs'kogo Natsіonal'nogo Tekhnіchnogo Unіversitetu іmenі Petra Vasilenka [Bulletin of the Kharkiv National Technical University of the Iman Petra Vasylanka.], 155, 14–20 (in Russian).

9. Kusyak V. A., Rushtel O. S. (2015) Design of Automated Mechatronic Control Systems for the Power Unit of Trucks and Road Trains. Minsk, Belarusian National Technical University. 295 (in Russian).

10. Bogomolov V. A., Klimenko V. I., Alekseev R. V. (2012) Amplifier for Drive of Motor Vehicle Clutch. Pat. 100908 Ukraine (in Ukraine).

11. Gerts E. V. (1968) Pneumatic Actuators. Moscow, Mashinostroenie Publ. 359 (in Russian).

12. Metlyuk N. F., Avtushko V. P. (1980) Dynamics of Pneumatic and Hydraulic Actuators Cars. Moscow, Mashinostroenie Publ. 232 (in Russian).

13. Turenko A. N., Mikhalyevych N. G., Leontiev D. N. (2015) Implementation of Intelligence Functions in ElectronicPneumatic Brake Control of Vehicles. Kharkov, Kharkiv National Automobile and Highway University, 2015. 450 (in Russian).

14. Lomaka S. I., Ryzhih L. A., Leontiev D. N., Cheban A. , Krasyuk A. N. (2009) Automatic Control Systems and Practical Implementation of the Control Algorithm. Vestnik Nacional'nogo Tekhnicheskogo Universiteta “HPI”. Informatika i Modelirovanie = Bulletin of the National Technical University “KhPI”. A series of “Information and Modeling”, 47, 9–18 (in Russian).

15. Gruzman I. S., Kirichuk V. S., Kosykh V. P., Peretyagin G. I. (2000) Digital Processing of Images in Information Systems. Novosibisrk, Novosibirsk State Technical University. 168 (in Russian).


Review

For citations:


Yaryta O.A., Mychalevych M.G., Leontiev D.N., Klymenko V.I., Bogomolov V.A., Gritsuk I.V., Novikova Y.B. FEATURES OF CONTROLLING ELECTROPNEUMATIC VALVES OF ACTUATOR TO CONTROL ITS CLUTCH WITH ACCELERATION VALVE. Science & Technique. 2018;17(1):64-71. https://doi.org/10.21122/2227-1031-2018-17-1-64-71

Views: 2235


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2227-1031 (Print)
ISSN 2414-0392 (Online)