satНАУКА и ТЕХНИКАScience & Technique2227-10312414-0392Belarusian National Technical University10.21122/2227-1031-2022-21-5-397-409sat-2596Research ArticleСТРОИТЕЛЬСТВОCIVIL AND INDUSTRIAL ENGINEERINGКомплексное исследование развития индустриального домостроенияThe Comparative Study of the Development on Prefabricated ConstructionГуриновичВ. Ю.GurinovichV. Yu.

Адрес для переписки: Гуринович Виталий Юрьевич –Белорусский национальный технический университет, просп. Независимости, 65,220013, г. Минск, Республика Беларусь.Тел.: +375 17 292-74-12    Gurinovich@bntu.by

Address for correspondence: Gurinovich Vitaliy Yu. –Belаrusian National Technical University,65 Nezavisimosty Ave., 220013 , Minsk, Republic of Belarus. Tel.: +375 17 292-74-12 Gurinovich@bntu.by

Gurinovich@bntu.byБелорусский национальный технический университетБеларусьBelarusian National Technical UniversityBelarus202207102022215397409Copyright © Гуринович В.Ю., 20222022Гуринович В.Ю.Gurinovich V.Y.Данная работа распространяется под лицензией Creative Commons Attribution 4.0.This work is licensed under a Creative Commons Attribution 4.0 License.https://sat.bntu.by/jour/article/view/2596

Индустриальное домостроение – одно из наиболее интенсивно развивающихся направлений исследований в области строительства и строительных технологий в мире. Для изучения направлений и результативности научных исследований, определения ведущих стран, учреждений, научных журналов и уровня развития индустриального домостроения в Республике Беларусь в разрезе экономически развитых государств выполнен наукометрический анализ на базе аналитической системы SciVal с использованием инструментов визуализации, количественных и качественных наукометрических метрик. Интенсивный рост количества публикаций в области индустриального домостроения и показателей анализируемых наукометрических метрик подтверждает тот факт, что индустриальное домостроение привлекает все большее количество исследователей во всем мире и является перспективным направлением для изучения. По результатам анализа определено, что основные тематики исследований в области индустриального домостроения – это проектирование и информационное моделирование, организация строительства и производства сборных конструкций, доставка конструкций на строительную площадку и их монтаж, в том числе надежность, экономичность, экологичность индустриального домостроения. Следует отметить, что изучению технологий и организации производства железобетонных изделий в заводских условиях и управления производством уделяется меньшее внимание, поэтому необходимы исследования в данных направлениях. Результаты проведенного наукометрического анализа позволяют выявить тенденции, определить приоритетные направления научных исследований и их связь с другими областями науки и могут являться базой для обнаружения пробелов в текущих исследованиях в области индустриального домостроения.

Prefabricated construction is one of the most intensively developing areas of research in the field of construction and building technology in the world. The results of the scientometric analysis prefabricated construction are presents in this paper. The purpose of the scientometric analysis was to study the directions and effectiveness of research, to determine the leading countries, organizations, scientific journals, to define the level of prefabricated construction in the Republic of Belarus in the context of economically developed countries. The scientometric analysis was carried out in the analytical system SciVal with the use visualization tools, quantitative and qualitative scientometric metrics. Growth of the number of publications in the field of prefabricated construction and indicators of analyzed scientometrics metrics confirms the fact that prefabricated construction attracts more and more researchers all over the world and is a promising direction of scientific research. Determined that design and informational modeling, organization of construction and precast structures production, delivery of structures to the construction site and their assembly, including reliability, efficiency, environmental friendliness of prefabricated construction are main topics in the field of prefabricated construction. At the same time, topics in the field of research of technologies and organization production of reinforced concrete elements in plant, production management are given less attention, which requires further research in these areas. The results of the scientometric analysis allow us to identify trends, determine priority areas for further research and their connection with other fields of science, and can be a scientific basis for identifying data gaps in current research in the field of prefabricated construction.

наукометрический анализиндустриальное домостроениесборные железобетонные конструкциипроизводство сборных конструкцийнаукометрические метрикиисследованиетематический кластербиблиографический поискscientometric analysisprefabricated constructionprecast reinforced concrete structuresprecast productionscientometric metricsresearchtopic clusterbibliographic searchReferencesПилипенко, В. М. Перспективы развития индуст-риального домостроения в Республике Беларусь / В. М. Пилипенко, В. А. Потерщук, Т. М. Пецольд // Современные проблемы внедрения европейских стандартов в области строительства: сб. Междунар. науч.-техн. ст. Минск: БНТУ, 2015. С. 8–14.Pilipenko V. M., Potershchuk V. A., Petsold T. M. (2015) Prospects for development of industrial housing construction in the Republic of Bealrus. Sovremennye problemy vnedreniya evropeiskikh stan-dartov v oblasti stroitel'stva: sb. Mezhdunar. nauch.-tekhn. st. [Modern problems of implementation of European standards in the field of construction: Collection of International Scientific and Technical Papers]. Minsk, Belarusian National Technical University, 8–14 (in Russian).Государственная программа «Строительство жилья» на 2016–2020 годы [Электронный ресурс]: постановление Совета Министров Республики Беларусь, 21 апр. 2016, № 325 // Право.by. Режим доступа: https://pravo.by/document/?guid=12551&p0=C21600325&p1=1Government Program “Housing Construction” for 2016–2020: approved by the resolution of the Council of Ministers of the Republic of Belarus on 21.04.2016 No. 325. Pravo.by. Available at: https://pravo.by/document/?guid=12551&p0=C21600325&p1=1 (in Russian).Azman, M. N. A. Comparative Study on Prefabrication Construction Process / M. N. A. Azman, M. S. S. Ahamad, W. M. A. Wan Hussin // International Surveying Research Journal. 2012. Vol. 2, No 1. P. 45–58.Azman, M. N. A., Ahamad M. S. S., Wan Hussin W. M. A. (2012) Comparative Study on Prefabrication Construction Process. International Surveying Research Journal, 2 (1), 45–58.Polat, G. Precast Concrete Systems in Developing Vs. Industrialized Countries / G. Polat // Journal of Civil Engineering and Management. 2010. Vol. 16, No 1. P. 85–94. https://doi.org/10.3846/jcem.2010.08Polat G. (2010) Precast Concrete Systems in Developing Vs. Industrialized Countries. Journal of Civil Engineering and Management, 16 (1), 85–94. https://doi.org/10.3846/jcem.2010.08.Ефименко, А. З. Развитие и выявление резервов мощности предприятий стройиндустрии / А. З. Ефименко. М.: МГСУ, 2012. 198 с.Efimenko A. Z. (2012) Development and identification of power reserves of construction industry enterprises. Moscow, Moscow State University of Civil Engineering. 198 (in Russian).A Review and Scientometric Analysis of Global Research on Prefabricated Buildings [Electronic Resource] / Wenhui Liu [et al.] // Advances in Civil Engineering. 2021. Vol. 2021. P. 1–8. https://doi.org/10.1155/2021/8869315Wenhui Liu, Hong Zhang, Qian Wang, Tianran Hua, Hong Xue (2021) A Review and Scientometric Analysis of Global Research on Prefabricated Buildings. Advances in Civil Engineering, 2021, 1–18. https://doi.org/10.1155/2021/8869315Critical Evaluation of Off-Site Construction Research: a Scientometric Analysis / M. R. Hosseini [et al.] // Automation in Construction. 2018. Vol. 87. P. 235–247. https://doi.org/10.1016/j.autcon.2017.12.002Hosseini M. R., Martek I., Zavadskas E. K., Aibinu A. A., Arashpour M., Chileshe N. (2018) Critical Evaluation of Off-Site Construction Research: a Scientometric Analysis. Automation in Construction, 87, 235–247. https://doi.org/10.1016/j.autcon.2017.12.002Руководство по наукометрии: индикаторы развития науки и технологии / М. А. Акоев [и др.]; под. ред. М. А. Акоева. Екатеринбург: Изд-во Уральского ун-та, 2014. 250 с. https://doi.org/10.15826/b978-5-7996-1352-5.0000Akoev M., Markusova V., Moskaleva O., Pislyakov V. (2014) Handbook for Scientometrics: Indicators of science and technology development. Ekaterinburg, Publishing House of the Ural University. 250 (in Russian). https://doi.org/10.15826/b978-5-7996-1352-5.0000Alinaitwe, H. M. Assessing the Degree of Industrialization in Construction – a Case of Uganda / H. M. Alinaitwe, J. A. Mwakali, B. Hansson // Journal of Civil Engineering and Management. 2006. Vol. 12, No 3. P. 221–229. https://doi.org/10.3846/13923730.2006.9636396Alinaitwe H. M., Mwakali J. A., Hansson B. (2006) Assessing the Degree of Industrialization in Construction – a Case of Uganda. Journal of Civil Engineering and Management, 12 (3),. 221–229. https://doi.org/10.3846/13923730.2006.9636396Vogler, А. The House as a Product / A. Vogler. Amsterdam: IOS Press, 2015. 198 p.Vogler А. (2015) The House as a Product. Amsterdam, IOS Press. 198.A Comparative Study of Environmental Performance between Prefabricated and Traditional Residential Buildings in China / X. Cao [et al.] // Journal of Cleaner Production. 2015. Vol. 109. P. 131–143. https://doi.org/10.1016/j.jclepro.2015.04.120Cao X., Li X., Zhu Y., Zhang Z. (2015) A Comparative Study of Environmental Performance between Prefabricated and Traditional Residential Buildings in China. Journal of Cleaner Production, 109, 131–143. https://doi.org/10.1016/j.jclepro.2015.04.120.Precast Concrete Value Engineering Accommodates Difficult Sites / P. Hamill [et al.] // PCI Journal. 2006. Vol. 51, No 4. P. 2–25. https://doi.org/10.15554/pcij.07012006.18.40Hamill P., Bertolini M., Biebighauser M., Bechara C. H., Wilden H. (2006) Precast Concrete Value Engineering Accommodates Difficult Sites. PCI Journal, 51 (4), 2–25. https://doi.org/10.15554/pcij.07012006.18.40Case Study-Based Challenges of Quality Concrete Finishing for Architecturally Complex Structures / J. D. Manrique [et al.] // Journal of Construction Engineering and Management. 2007. Vol. 133, No 3. P. 208–216. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:3(208)Manrique J. D., Al-Hussein M., Telyas A., Funston G. (2007) Case Study-Based Challenges of Quality Concrete Finishing for Architecturally Complex Structures. Journal of Construction Engineering and Management, 133 (3), 208–216. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:3(208)Towards Adoption of Prefabrication in Construction / V. W. Y. Tam [et al.] // Building and Environment. 2007. Vol. 42, No10. P. 3642–3654. https://doi.org/10.1016/j.buildenv.2006.10.003Tam V. W., Tam C. M., Zeng S. X., Ng W. C. (2007) Towards Adoption of Prefabrication in Construction. Building and Environment, 42 (10), 3642–3654. https://doi.org/10.1016/j.buildenv.2006.10.003.VanGeem, M. Achieving Sustainability with Precast Concrete / M. VanGeem // PCI Journal. 2006. Vol. 51, No 1. P. 42–61. https://doi.org/10.15554/pcij.01012006.42.61VanGeem M. (2006) Achieving Sustainability with Precast Concrete. PCI Journal, 51 (1), 42–61. https://doi.org/10.15554/pcij.01012006.42.61Application of Sustainable Prefabricated Wall Technology for Energy Efficient Social Housing / R. Chippagiri [et al.] // Sustainability. 2021. Vol. 13, No 3. P. 1195. https://doi. org/10.3390/su13031195Chippagiri R., Gavali H. R., Ralegaonkar R. V., Riley M., Shaw A., Bras A. (2021). Application of Sustainable Prefabricated Wall Technology for Energy Efficient Social Housing. Sustainability, 13 (3), 1195. https://doi.org/10.3390/su13031195Jaillon, L. Sustainable Construction Aspects of Using Prefabrication in Dense Urban Environment: а Hong Kong Case Study / L. Jaillon, C. S. Poon // Construction Management and Economics. 2008. Vol. 26, No 3. P. 953–966. https://doi.org/10.1080/01446190802259043Jaillon L., Poon C. S. (2008) Sustainable Construction Aspects of Using Prefabrication in Dense Urban Environment: а Hong Kong Case Study. Construction Management and Economics, 26 (3), 953–966. https://doi.org/10.1080/01446190802259043Barriers to Promoting Prefabricated Construction in China: а Cost-Benefit Analysis / J. Hong [et al.] // Journal of Cleaner Production. 2018. Vol. 172. P. 649–660. https://doi.org/10.1016/j.jclepro.2017.10.171Hong J., Shen G. Q., Li Z., Zhang B., Zhang W. (2018) Barriers to Promoting Prefabricated Construction in China: а Cost-Benefit Analysis. Journal of Cleaner Production, 172, 649–660. https://doi.org/10.1016/j.jclepro.2017.10.171Cost Analysis for Sustainable Off-Site Construction Based on a Multiple-Case Study in China / C. Mao [et al.] // Habitat International. 2016. Vol. 57. P. 215–222. https://doi.org/10.1016/j.habitatint.2016.08.002Mao C., Xie F., Hou L., Wu P., Wang J., Wang X. (2016) Cost Analysis for Sustainable Off-Site Construction Based on a Multiple-Case Study in China. Habitat International, 57, 215–222. https://doi.org/10.1016/j.habitatint.2016.08.002Pan, W. Demystifying the Cost Barriers to Offsite Construction in the UK / W. Pan, R. Sidwell // Construction Management and Economics. 2011. Vol. 29, No 11. P. 1081–1099. https://doi.org/10.1080/01446193.2011.637938Pan W., Sidwell R. (2011) Demystifying the Cost Barriers to Offsite Construction in the UK. Construction Management and Economics, 29 (11), 1081–1099. https://doi.org/10.1080/01446193.2011.637938Li, Z. Critical Review of the Research on the Management of Prefabricated Construction / Z. Li, G. Q. Shen, X. Xue // Habitat International. 2014. Vol. 43. P. 240–249. https://doi.org/10.1016/j.habitatint.2014.04.001Li Z., Shen G. Q., Xue X. (2014) Critical Review of the Research on the Management of Prefabricated Construction. Habitat International, 43, 240–249. https://doi.org/10.1016/j.habitatint.2014.04.001Best Practice of Prefabrication Implementation in the Hong Kong Public and Private Sectors / V. W. Y. Tam [et al.] // Journal of Cleaner Production. 2015. Vol. 109. P. 216–231. https://doi.org/10.1016/j.jclepro.2014.09.045Tam V. W., Fung I. W., Sing M. C., Ogunlana S. O. (2015) Best Practice of Prefabrication Implementation in the Hong Kong Public and Private Sectors. Journal of Cleaner Production, 109, 216–231. https://doi.org/10.1016/j.jclepro.2014.09.045Nadim, W. Offsite Production in the UK: the Way Forward? A UK Construction Industry Perspective / W. Nadim, J. S. Goulding // Constr. Innov. 2010. Vol. 10, N 2. P. 181–202. https://doi.org/10.1108/14714171011037183Nadim W., Goulding J. S. (2010) Offsite Production in the UK: the Way Forward? A UK Construction Industry Perspective. Construction Innovation, 10 (2), 181–202. https://doi.org/10.1108/14714171011037183Zhai, X. Factors Impeding the Offsite Production of Housing Construction in China: an Investigation of Current Practice / X. Zhai, R. Reed, A. Mills // Construction Management and Economics. 2014. Vol. 32, N1-2. P. 40–52. https://doi.org/10.1080/01446193.2013.787491Zhai X., Reed R., Mills A. (2014) Factors Impeding the Offsite Production of Housing Construction in China: an Investigation of Current Practice. Construction Management and Economics, 32 (1–2), 40–52. https://doi.org/10.1080/01446193.2013.787491Технология строительного производства и охрана труда / А. П. Коршунова [и др.]; под общ. ред. Г. Н. Фомина. М.: Архитектура-С, 2007. 375 с.Korshunova A. P., Mushtaeva N. E., Nikolaev V. A., Senatorov N. Ya., Strunkin N. P., Fomin G. N. (2007) Technology of construction production and labor protection. Moscow, Arkhitektura-S Publ. 375 (in Russian).Unlocking the Green Opportunity for Prefabricated Buildings and Construction in China / Yuan Chang [et al.] // Resources, Conservation and Recycling. 2018. Vol. 139. P. 259–261. https://doi.org/10.1016/j.resconrec.2018.08.025Chang Y., Li X., Masanet E., Zhang L., Huang Z., Ries R. (2018) Unlocking the Green Opportunity for Prefabricated Buildings and Construction in China. Resources, Conservation and Recycling, 139, 259–261. https://doi.org/10.1016/j.resconrec.2018.08.025Precast Supply Chain Management in Off-Site Construction: a Critical Literature Review / Z. Wang [et al.] // Journal of Cleaner Production. 2019. Vol. 232. P. 1204–1217. https://doi.org/10.1016/j.jclepro.2019.05.229Wang Z., Hu H., Gong J., Ma X., Xiong W. (2019) Precast Supply Chain Management in Off-Site Construction: a Critical Literature Review. Journal of Cleaner Production, 232, 1204–1217. https://doi.org/10.1016/j.jclepro.2019.05.229Matthew, Goh. Lean Production Theory-Based Simulation of Modular Construction Processes / Matthew Goh, Yang Miang Goh // Automation in Construction. 2019. Vol. 101. P. 227–244.Matthew Goh, Yang Miang, Goh Lean (2019) Production Theory-Based Simulation of Modular Construction Processes. Automation in Construction, 101, 227–244. https://doi.org/10.1016/j.autcon.2018.12.017Liew, J. Innovation in Modular Building Construction / J. Liew, Y. Richard // 9th International Conference on Advances in Steel Structures (ICASS 2018), Hong Kong, 5–7 Decem. 2018. P. 1–14. https://doi.org/10.18057/ICASS2018.K.05Liew J., Richard Y. (2018) Innovation in Modular Building Construction. 9th International Conference on Advances in Steel Structures (ICASS 2018), Hong Kong, 5–7 Decem. 2018, 1–14. https://doi.org/10.18057/ICASS2018.K.05Grosskopf, K. R. Offsite Construction – U.S. Market Trends in Prefabrication Challenges for Technology Innovation: аn Agenda for the Future / K. R. Grosskopf, J. W. Elliott, J. E. Killingsworth // International Conference on Sustainable Smart Manufacturing (S2M), Lisbon, 20–22 Oct. 2016. P. 393–398. https://doi.org/10.1201/9781315198101-69Grosskopf K. R., Elliott J. W., Killingsworth J. E. (2016) Offsite Construction – U.S. Market Trends in Prefabrication Challenges for Technology Innovation: аn Agenda for the Future. International Conference on Sustainable Smart Manufacturing (S2M), Lisbon, 20–22 Oct. 2016, 393–398. https://doi.org/10.1201/9781315198101-69

The authors declare that there are no conflicts of interest present.